Datasheet

Construction manual - Robot kit NIBO burger 08.09.2015
For an easier soldering of the motor contacts and board  you can bent up
the motor contacts a little bit.
When the motor fits correctly, board  is soldered to board  beginning with
the middle soldering contact (see pictures).
These soldering joints work with the help of capillary action: you tin the
respective point sparse with tin-solder and heat the point afterwards about
10 seconds with the soldering iron. Because of the capillary action the tin-
solder will be pulled inwards and the boards will be fixed together. So you get
an electric and a mechanic contact.
Tip: While soldering the transmission unit you have to pay attention that
the several circuit boards are orthogonal adjusted. It is not easy to
disassemble the unit afterwards.
http://nibo.nicai-systems.de 68