Datasheet

Construction manual - Robot kit NIBO burger 08.09.2015
2.5.2 Assembling of the engine section / transmission unit
Now the two motors and the circuit boards  and  have to be fixed to
the circuit board .
First of all put the motor axis through the boards as shown below.
The soldering contacts of the motors must face downwards!!
In case of one motor does not fit correctly into the hole, the hole can be
carefully widened with a 6mm drill bit.
We start with the left side (driving direction):
Put the board through the fitting slots of the circuit board  so that the
motor will be planar onto the “MOTOR LEFT” field.
The soldering contacts of the motor have to fit exactly into the recess of
board .
http://nibo.nicai-systems.de 67