Datasheet

Construction manual - Robot kit NIBO burger 08.09.2015
2.3.11.2 USB socket
During installation of the USB socket X0
you should pay attention that the smaller
pins are not bent. The part is polarity safe.
The USB socket is soldered at large at
6 soldering pads.
Place the USB socket at the bottom side of the board...
…and solder it at the top side of the board at 6 soldering pads, the two
holders of the housing have to be completely filled with tin solder:
http://nibo.nicai-systems.de 58
Type Part
USB
socket
X0