Datasheet

Construction manual - Robot kit NIBO burger 08.09.2015
2.3.11 Battery packs
Now the two battery packs will be attached to board .
Before soldering they must be fixed each with one small cable strap.
Before assembling the packs you have to pay attention to the “+/-” labels
on the circuit board and to the “+/-” labels of the respective battery pack (the
important side is the side with the soldering contacts: the outside contact
plates):
The “+/-” labels of the board and of the pack only has to suit at the side with
the soldering contacts.
According to this the battery packs are put on the board with the soldering
contacts (outside contact plates) pointing to the edge of the board:
Before soldering the battery packs must be fixed with the small cable straps
at the circuit board.
http://nibo.nicai-systems.de 54