Datasheet

Construction manual - Robot kit NIBO burger 08.09.2015

2.3.9.8 Switch

The toggle switch S1 may be

soldered onto the board in

both possible orientations,

the functionality stays the

same.

2.3.10 Electrolytic capacitors

During placement of

the 470µF electrolytic

capacitors (C1, C12),

the 100µF electrolytic

capacitors (C4, C5)

and the two 4,7µF

electrolytic capacitors (C21 und C22) onto the board you

have to pay attention to the polarity!

The short leg must be placed into the rectangular pad!

The positive connections are marked with “+” sign on the board. The positive

pin of the electrolytic capacitor is the long leg and the negative one is the

short leg. The negative connections are implemented as rectangular pads.

You can find a “-” symbol on the housing of the capacitor.

2.3.10.1 Straight sockets – 5 contacts

The 10 straight sockets with 5

contacts have to be soldered

into the pads X1-X4, X8-X10

and X11-X13.

You don't have to pay attention

to the polarity.

X11-X13 are on board , all other sockets are to find on board 

http://nibo.nicai-systems.de 51

Type Part

Switch S1

Value Part

470 µF C1

C12

100 µF C4

4,7 µF C21

C22

Type Part

Straight

socket

5 contacts

X10

X11

X12

X13