Datasheet

Construction manual - Robot kit NIBO burger 08.09.2015
2.3.6 Ceramic multilayer capacitors
There are 13 ceramic multilayer
capacitors to be placed onto the
board.
The capacitors C2, C8, C9, C13 and
C25 have a value of 10 nF
(imprint: 103).
The other capacitors C3, C6, C7, C10, C11, C20, C26 and
C27 have a value of 100 nF (imprint: 104).
You don't have to pay attention to the polarity.
Info: The imprint 104 means 10*10^4 pF, or generally:
the imprint xyz means a capacity of xy*10^z pF.
C20 - C27 are to find on board , all others are on board 
2.3.7 Ceramic plate capacitors
The both ceramic plate
capacitors C23 and C24 have a
capacity of 22 pF (imprint: 22).
You don't have to pay attention
to the polarity.
They are placed on board .
2.3.8 Crystal
The crystal Q1 has a frequency
of 15,000MHz and must be
placed on board . After
positioning the body should not
be in contact with the board
(Optimal distance to the
board: 1mm).
You don't have to pay attention to the polarity.
Tip: It helps to put a 1mm thick piece of cardboard between plate and crystal
before soldering. After the crystal is soldered the cardboard can be carefully
removed.
http://nibo.nicai-systems.de 46
Value Part
10 nF C2
C8
C9
C13
C25
100 nF
C3
C6
C7
C10
C11
C20
C26
C27
Value Part
22 pF C23
C24
Value Part
15 MHz Q1