Datasheet

Construction manual - Robot kit NIBO burger 08.09.2015

2.3.5.2 Zener-/Schottky-Diodes

The Zener diodes D20 and

D21 of type BZX83V003.6

(respectively 55C3V6) and

the Schottky diodes D1,

D22, D23 and D24 of type

BAT85 must be bend like the

resistors before placement.

You have to pay attention to the polarity!!

The cathode is indicated by the ring on the diode and must be soldered at the

white line, respectively the symbol of the diode, marked on the circuit board.

The figure shows the symbol of the diode and below it

shows the diode as electrical part. Before soldering you

have to pay attention that the ring on the diode is

soldered at the side of the vertical line of the symbol.

Tip: The Schottky diodes are labeled with BAT85 in small letters.

They are packed as group of four.

D1 is to find on board , all others are to find on board 

2.3.5.3 Silizium-Diodes

Also the Silizium diodes

D2-D9 of type 1N4007

must be bend like the

resistors before placement.

You have to pay attention

to the polarity!!

The white line on the board print, respectively

the printed symbol of the diode, marks the position where the cathode

(indicated by the ring on the diode) has to be soldered.

http://nibo.nicai-systems.de 45

Type Part

BZX83

V003.6

D20

D21

BAT85 D1

D22

D23

D24

Type Part

1N4007 D2