Datasheet

Construction manual - Robot kit NIBO burger 08.09.2015

Now turn the circuit boards!

The resistors with the value 820 Ω

(code: grey-red-brown- (gold))

have to be placed into the soldering pads R53 and

R54 on the top sides of the boards.

The 10 nF ceramic multilayer capacitors

(imprint: 103) have to be placed into the soldering

pads C53 and C54 on the top sides of the boards.

You don't have to pay attention to the polarity.

Tip: The resistors and the capacitors have to be flush mounted onto the

circuit boards and . Otherwise they get in conflict with the gearing!

Finished top sides of the boards:

http://nibo.nicai-systems.de 41