Manualshelf

Datasheet

ManualsBrandsNicai Systems ManualsDevelopment Boards & KitsRobot kit NIBO burger
31323334353637383940
Construction manual - Robot kit NIBO burger 08.09.2015
2.3.3 Component placement of boards and
In this section we place components onto the both side plates of NIBO burger.
All components have to be placed on the bottom sides of the circuit boards:
Four 5-pin right angle sockets have to be placed onto
the bottom sides of the boards into the soldering
pads J1.B, J2.B, J3.B und J4.B.
They are soldered from the top side.
The sockets should be planar onto the boards as possible:
http://nibo.nicai-systems.de 36
Bottom side of the board