Datasheet

Construction manual - Robot kit NIBO burger 08.09.2015
2.3.1.2 Seperation of pin header strips
The kit contains two sorts of pin header strips. All of them must be seperated
to 5 pin headers before assembly.
Typ A: right angle headers: Typ B: straight headers:
Because all headers must be seperated to 5-pin configuration, you have to
count 5 contacts and break the strip with the thumbnails at the right position:
Tip: To count correctly it can be helpful to place a 5-pole socket onto the
header before breaking.
http://nibo.nicai-systems.de 27