Buying Guide

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
5
AHEAD OF THE FLOW
®
www.nibco.com
Brass Ball Valves
Two-Piece Body • Full Port • Blowout-Proof Stem • PTFE Seats
¹⁄v"-2" 600 PSI/41.4 Bar Non-Shock Cold Working Pressure
2¹⁄₂"-4" 400 PSI/27.6 Bar Non-Shock Cold Working Pressure
T-FP-600A
Threaded
MATERIAL LIST
PART SPECIFICATION
1. Body Forged Brass
2
CU > 57%
2. End Cap Forged Brass
2
CU > 57%
3. Ball Seat PTFE
4. Ball Chrome Plated Brass - C46500 (1/4"-1"), Stainless Steel 316 (11/4"-4")
5. Stem Brass
6. O-Ring (Stem Seal)* Fluorocarbon (FKM)
7. Stem Packing PTFE
8. Packing Nut Brass
9. Lever Handle
1
Steel, Plated
10. Lock Washer* Stainless Steel
11. Handle Nut
1
Stainless Steel
Note: * Parts 6 and 10 are applicable of S-FP-600A only.
1
Due to Standard Approvals, Lever Handles and Nuts are not interchangeable between Solder and Threaded.
2
For Material Certification, contact NIBCO Technical Services.
S-FP-600A
C x C
T-FP-600A
NPT x NPT
DIMENSIONS—WEIGHTS—QUANTITIES
Dimensions
T-FP-600A S-FP-600A T-FP-600A S-FP-600A T-FP-600A S-FP-600A
Port
Size A A B B C C D T-FP-600A S-FP-600A T-FP-600A S-FP-600N
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Lbs. Kg. Ctn. Qty. Ctn. Qty.
¹⁄v 8 1.76 45 — — 1.73 44 — — 3.54 90 — — .39 10 .33 .15 — — 18 —
C⁄₈ 10 1.76 45 1.75 44 1.73 44 1.58 40 3.54 90 3.78 96 .39 10 .30 .14 .38 .17 18 18
¹⁄₂ 15 2.05 52 2.01 51 1.92 49 1.78 45 3.54 90 3.78 96 .59 15 .44 .20 .40 .18 18 18
C⁄v 20 2.36 60 2.74 70 2.09 53 2.13 54 3.78 96 3.98 101 .75 19 .66 .30 .67 .30 12 12
1 25 2.76 70 3.35 85 2.56 65 2.52 64 4.53 115 4.41 112 .98 25 1.10 .50 1.12 .51 6 6
1¹⁄v 32 3.31 84 3.78 96 2.95 75 2.65 67 4.53 115 5.04 128 1.26 32 1.57 .71 1.49 .67 4 4
1¹⁄₂ 40 3.66 93 4.42 112 3.35 85 3.12 79 5.51 140 6.22 158 1.57 40 2.40 1.09 2.38 1.08 2 2
2 50 4.18 106 5.34 136 3.68 93 3.41 87 5.51 140 6.22 158 1.97 50 3.37 1.53 3.62 1.64 2 2
2¹⁄₂ 65 5.38 137 6.28 160 4.76 121 4.76 121 8.66 220 8.66 220 2.56 65 7.60 3.45 6.36 2.88 3 3
3 75 6.04 153 7.15 182 5.08 129 5.08 129 8.66 220 8.66 220 2.95 75 9.36 4.24 8.32 3.77 2 2
4 100 7.39 188 — — 5.87 149 — — 9.61 244 — — 3.89 99 16.85 7.64 — — 1 —
S-FP-600A
Solder
CSA CERTIFIED TO ASME B16.44 AND CR91-002 (THREADED ¹⁄v"-4")
• UL LISTED (THREADED ¹⁄v"-4") • FM APPROVED (THREADED ¹⁄v"-2")
• CRN: 0C19353.5XX*
Threaded
CSA (¹⁄v" - 4"):
• CR91-002: ¹⁄₂ psig, 2 psig, and 5 psig (these are specific approved categories)
• ASME B13.44: 125 psig (maximum)
• Temperature is -4° F to 194° F
Threaded
FM (1/4" - 2"):
• 175wwp Threaded
UL, Gas and Oil (¹⁄v" - 4"):
• YQNZ, Compressed Gas Shutoff Valves: 250 psi
• YRBX, Flammable Liquid Shutoff Valves: 250 psi
• YRPV, Gas Shutoff Valves: 250 psi
• YSDT, LP-Gas Shutoff Valves: 250 psi
• MHKZ, Manual Valves: 250 psi
NOT FOR USE WITH POTABLE DRINKING WATER APPLICATIONS AFTER JANUARY 3, 2014.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other
reproductive harm. For more information go to www.P65Warnings.ca.gov.
*Please contact Technical
Customer Service for the CRN
Jurisdictions/Provinces list