Buying Guide

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
22
AHEAD OF THE FLOW
®
www.nibco.com
FaucetLock
™
Fits standard C⁄v" hose thread
™
Protect Your
Water Supply
Perfect for use in your:
Front & Backyard,
Vacation Home, Condo,
Apartment House,
Dock, Campsite,
Storefront, School,
Trailer Park,
Parking Lot,
Gas Station...
Save Water ... Save Money
Extra Key Included
No Tools Required
Twist On & Lock
PATENT PENDING
1. Inspect FaucetLock’s threads for dirt and debris, and clean if necessary.
2. View lock, make sure key notches are in aligned (OPEN) position. (See Figure A)
3. Hold lock by its textured ring and screw onto hose bibb in a clockwise direction
until tight.
4. Insert key and turn clockwise half a turn then remove key. FaucetLock is now in its
secured and locked postition. (See Figure B) (FaucetLock is secured on hose bibb if
the textured ring spins freely)
5. To remove FaucetLock, insert key and rotate half a turn counterclockwise. Remove
key. Hold textured ring and turn counterclockwise until FaucetLock screws off the
hose bibb.
6. While FaucetLock is detached from hose bibb, be careful not to allow dirt or
debris to get into lock or threads.
Installation Instructions
Freezing weather precaution: If installed on a frostproof sillcock,
make sure valve has had time to drain after closing and before
installation of FaucetLock
™
.