Buying Guide

62
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
Visit our website for the most current information.
www.nibco.com
AHEAD OF THE FLOW
®
uFor detailed operating pressure, refer to pressure temperature chart on pages 71 and 72.
Stainless Steel Ball Valves
One-Piece Body • Reduced Port • Blowout-Proof Stem •
316 SS Trim • Vented Ball
2000 PSI/138 Bar Non-Shock Cold Working Pressure
t
CONFORMS TO MSS SP-110
T-560-S6-R-66-LL
Threaded
MATERIAL LIST
PART SPECIFICATION
1. Body Stainless Steel ASTM A 351 Type CF8M
2. Body Insert Stainless Steel ASTM A 351 Type CF8M
or ASTM A 351 Type CF8M
3. Ball (Vented) Stainless Steel ASTM A 276 Type 316
or ASTM A 351 Type CF8M
4. Stem Stainless Steel ASTM A 276 Type 316
5. Seat Reinforced PTFE
6. Thrust Washer Reinforced PTFE (Carbon 25% + PTFE 75%)
7.
1
Stem Packing PTFE
8. Threaded Pack Gland Stainless Steel ASTM A 276 Type 316
9. Handle Nut Stainless Steel ASTM A 276 Type 304
10. Locking Handle Stainless Steel ASTM A 240 Type 304
1
¼"-¾" one each, 1"-2" two each.
NOTE: valves are static grounded by thrust washer and packing.
Valves tested in accordance with ASME B16.34
DIMENSIONS—WEIGHTS—QUANTITIES
Dimensions
Size A B D L H T-560-S6-R-66-LL Master
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty.
¼ 8 2.28 58 1.10 28 .31 8 4.29 109 1.97 50 .68 .31 50
⅜ 10 2.28 58 1.10 28 .31 8 4.29 109 1.97 50 .68 .31 50
½ 15 2.60 66 1.10 28 .31 8 4.29 109 1.97 50 .66 .30 50
¾ 20 2.83 72 1.34 34 .47 12 4.29 109 2.20 56 .93 .42 50
1 25 3.23 82 1.61 41 .62 16 5.75 146 2.56 65 1.59 .72 40
1 ¼ 32 3.54 90 1.97 50 .81 21 5.75 146 2.76 70 2.22 1.01 20
1 ½ 40 3.86 98 2.24 57 1.00 25 7.40 188 3.29 84 3.22 1.46 20
2 50 4.33 110 2.76 70 1.25 32 7.40 188 3.49 89 4.65 2.11 10
T-560-S6-R-66-LL
NPT x NPT
1/4" - 3/4" 1" - 2"¼" - ¾"
Revised 11/20/2017