Buying Guide

59
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
Visit our website for the most current information.
www.nibco.com
AHEAD OF THE FLOW
®
DIMENSIONS—WEIGHTS—QUANTITIES
Dimensions
Size A D E F G K H L ISO TM or KM-595-CS-R-66 Master
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. 5211 Lbs. Kg. Ctn. Qty.
¼ 8 2.49 63 .34 9 .71 18 1.42 36 — — — — 2.36 60 4.17 106 F03 1.00 .45 10
⅜ 10 2.49 63 .34 9 .71 18 1.42 36 — — — — 2.36 60 4.17 106 F03 1.00 .45 10
½ 15 2.76 70 .56 14 .71 18 1.42 36 .38 10 .87 22 2.36 60 4.17 106 F03 1.20 .54 10
¾ 20 3.03 77 .83 21 .83 21 1.65 42 .50 13 1.08 27 2.83 72 5.04 128 F04 1.90 .86 10
1 25 3.63 92 1.00 25 .83 21 1.65 42 .50 13 1.34 34 3.07 78 5.04 128 F04 2.90 1.31 8
1 ¼ 32 4.14 105 1.25 32 .98 25 1.97 50 .50 13 1.69 43 3.35 85 7.83 199 F05 4.30 1.93 5
1 ½ 40 4.73 120 1.50 38 .98 25 1.97 50 .50 13 1.93 49 3.66 93 7.83 199 F05 6.00 2.70 5
2 50 5.43 138 1.97 50 .98 25 1.97 50 .62 16 2.42 61 4.09 104 7.83 199 F05 9.50 4.28 2
Carbon Steel Ball Valves
Three-Piece Body • Full Port • Cast ISO Mounting Pad •
Blowout-Proof Stem • 316 SS Trim • Vented Ball
1000 PSI/69 bar non-shock cold working pressure
t
CONFORMS TO MSS SP-110
TM-595-CS-R-66
Threaded
ISO Mount Pad
KM-595-CS-R-66
Socket Weld (1/2"-2")
ISO Mount Pad
MATERIAL LIST
PART SPECIFICATION
1. Stop Pin Stainless Steel ASTM A 276 Type 304
2. Stop Plate Carbon Steel ASTM A 283
3. Stem Stainless Steel ASTM A 276 Type 316
4. Handle Nut Carbon Steel A 283
5. Stem Packing (1 Set) Carbon Filled PTFE
6. Thrust Washer Carbon Filled PTFE
7. Cap Bolt (4) Carbon Steel ASTM A 193 Grade B7
8. Body Ends (2) Carbon Steel ASTM A 216 Grade WCB
9. Seat (2) Reinforced PTFE
10. Body Carbon Steel ASTM A 216 Grade WCB
11. Ball (Vented) Stainless Steel ASTM A 276 Type 316
or ASTM A 351 Type CF8M
12. Union Seal (2) Reinforced PTFE
13. Cap Nut (4) Carbon Steel A 283
14. Threaded Pack Gland Carbon Steel ASTM A 108 Type 1045
15. Handle Carbon Steel ASTM A 283
NOTE: valves are static grounded by thrust washer and packing.
TM or KM-595-CS-R-66
NPT x NPT or SOC x SOC
uFor detailed operating pressure, refer to pressure temperature chart on pages 71 and 72.
Revised 11/20/2017