Buying Guide

56
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
Visit our website for the most current information.
www.nibco.com
AHEAD OF THE FLOW
®
Carbon Steel Ball Valves
Two-Piece Bar Stock Body • Conventional Port •
Blowout-roof Stem • 316 SS Trim • Vented Ball
2000 PSI/138 bar non-shock cold working pressure (¼"-1")
1500 PSI/103 bar non-shock cold working pressure (1¼"-2")
t
CONFORMS TO MSS SP-110
T-580-CS-R-66
Threaded
MATERIAL LIST
PART SPECIFICATION
1. Handle Nut Carbon Steel ASTM A 283
2. Stem Stainless Steel ASTM A 276 Type 316
3. Lock Washer Carbon Steel
4. Belleville Washer (2) Carbon Steel ASTM A 686
5. Stem Packing (2) Reinforced PTFE
6. Thrust Washer Carbon Filled PTFE
7. Body End Piece Carbon Steel ASTM A 108 Type 1018
8. Spacer Seal PTFE
9. Ball (Vented) Stainless Steel ASTM A 276 Type 316
or ASTM A 351 Type CF8M
10. Seat (2) Reinforced PTFE
11. Body Carbon Steel ASTM A 108 Type 1018
12. Gland Washer Stainless Steel ASTM A 240 Type 304
13. Handle Carbon Steel ASTM A 283
¼"-1" 2000 PSI CWP, 1¼"-2" 1500 PSI CWP.
NOTE: valves are static grounded by thrust washer and packing.
DIMENSIONS—WEIGHTS—QUANTITIES
Dimensions
Size A B D H L T-580-CS-R-66 Master
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty.
¼ 8 2.30 58 1.02 26 .38 10 2.22 56 4.13 105 .59 .27 10
⅜ 10 2.30 58 1.02 26 .38 10 2.22 56 4.13 105 .55 .25 10
½ 15 2.52 64 1.26 32 .50 10 2.44 62 4.17 105 .79 .36 10
¾ 20 2.95 75 1.61 41 .69 13 2.64 66 4.17 105 1.43 .65 10
1 25 3.35 85 1.97 50 .89 18 2.83 72 5.83 148 2.40 1.08 10
1 ¼ 32 3.66 93 2.17 55 1.00 25 2.97 75 5.83 148 3.01 1.37 5
1 ½ 40 4.11 104 2.64 67 1.25 32 3.25 83 7.00 182 4.80 2.20 5
2 50 4.61 117 3.03 77 1.50 38 3.54 90 7.24 185 6.62 3.00 5
T-580-CS-R-66
NPT x NPT
uFor detailed operating pressure, refer to pressure temperature chart on pages 71 and 72.
Revised 11/20/2017