Buying Guide

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
4
AHEAD OF THE FLOW
®
www.nibco.com
Two-Piece Body • Standard Port • Blowout-Proof Stem • PTFE Seats
400 PSI/28 Bar Non-Shock Cold Working Pressure
T-580-A
Threaded
MATERIAL LIST
PART SPECIFICATION
1 Body Forged Brass
1
CU > 57%
2 End Cap Forged Brass
1
CU > 57%
3 Ball Seat PTFE
4 Ball Brass, Chrome Plated
5 Stem Brass
6 O-Ring Fluorocarbon (FKM)
7 Stem Packing PTFE
8 Packing Nut Brass
9 Lever Handle Steel, Plated
10 Lock Washer Stainless Steel
11 Stem Nut Stainless Steel
S-580-A
Solder
T-580-A
NPT x NPT
S-580-A
C x C
Brass Ball Valves
DIMENSIONS—WEIGHTS—QUANTITIES
Dimensions
T-580-A S-580-A T-580-A S-580-A
Size A A B C D Port Wt. Wt. Ctn.
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Lbs. Kg. Qty
¹⁄₂ 15 2.16 55 1.95 50 1.58 40 3.74 95 0.39 10 0.36 0.16 0.29 0.13 16
C⁄v 20 2.19 56 2.50 64 1.79 45 3.74 95 0.59 15 0.48 0.22 0.44 0.20 12
1 25 2.76 70 3.04 77 2.06 52 3.94 100 0.75 19 0.85 0.39 0.71 0.32 6
1¹⁄v 32 3.13 80 3.49 89 2.54 65 4.50 114 0.98 25 1.14 0.52 1.07 0.49 4
1¹⁄₂ 40 3.40 86 3.98 101 2.59 66 5.00 127 1.18 30 1.71 0.78 1.48 0.67 2
2 50 3.73 95 4.76 121 2.95 75 6.18 157 1.46 37 2.41 1.09 2.41 1.09 2
Note: S-580-A series to be soft soldered into lines using solder with the melting point not exceeding 470° F.
Use of higher temperature solders may damage the seat material.
Note:
1
For Material Certification, contact NIBCO Technical Services.
NOT FOR USE WITH POTABLE DRINKING WATER APPLICATIONS AFTER JANUARY 3, 2014.
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to www.
P65Warnings.ca.gov.