Buying Guide

66
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
Visit our website for the most current information.
www.nibco.com
AHEAD OF THE FLOW
®
uFor detailed operating pressure, refer to pressure temperature chart on pages 71 and 72.
Two-Piece Body • Full Port • Blowout-Proof Stem •
316 SS Trim • Cast Mounting Pad • Vented Ball
1000 PSI/69 bar non-shock cold working pressure
t
CONFORMS TO MSS SP-110
T-585-S6-R-66-LL
Threaded
MATERIAL LIST
PART SPECIFICATION
1. Handle Nut Stainless Steel ASTM A 276 Type 304
2. Stem Stainless Steel ASTM A 276 Type 316
3. Spring Washer Stainless Steel 304
4. Threaded Pack Gland Stainless Steel ASTM A 276 Type 316
5. Thrust Washer Carbon Filled PTFE
6. Gasket PTFE
7. Body End Piece Stainless Steel ASTM A 351 Type CF8M
8. Ball (Vented) Stainless Steel ASTM A 276 Type 316
or ASTM A 351 Type CF8M
9. Seat (2) Reinforced PTFE
10. Body Stainless Steel ASTM A 351 Type CF8M
11. Stem Packing (2) Carbon Filled PTFE
12. Locking Handle Stainless Steel ASTM A 240 Type 304
NOTE: valves are static grounded by thrust washer and packing.
Valves tested in accordance with ASME B16.34
T-585-S6-R-66-LL
NPT x NPT
DIMENSIONS—WEIGHTS—QUANTITIES
Dimensions
Size A B D H L T-585-S6-R-66-LL Master
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty.
¼ 8 2.21 56 .83 21 .43 11 2.20 56 4.21 107 .59 .27 10
⅜ 10 2.21 56 .83 21 .43 11 2.20 56 4.21 107 .56 .25 10
½ 15 2.60 66 1.02 26 .56 14 2.30 58 4.21 107 .75 .34 10
¾ 20 2.99 76 1.28 33 .81 21 2.79 71 5.73 146 1.47 .67 10
1 25 3.54 90 1.56 40 1.00 25 2.96 75 5.73 146 2.21 1.00 10
1¼ 32 3.94 100 1.97 50 1.25 35 3.56 90 7.45 189 3.42 1.55 5
1½ 40 4.41 112 2.20 66 1.50 38 3.84 98 7.45 189 5.20 2.36 5
2 50 5.00 127 2.76 69 2.00 50 4.24 108 8.08 205 7.99 3.63 5
Stainless Steel Ball Valves
Revised 11/20/2017