Buying Guide

36
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
Visit our website for the most current information.
www.nibco.com
AHEAD OF THE FLOW
®
Three-Piece Body • Full Port • Grooved End • Bronze Trim •
Blowout-Proof Stem
600 PSI/41.4 bar non-shock cold working pressure
G-595-Y
Grooved
MATERIAL LIST
PART SPECIFICATION
1. Handle Nut Zinc Plated Steel
2. Handle Zinc Plated Steel Clear Chromate
Plastisol Coated
3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000
4. Stem Silicon Bronze ASTM B 371 Alloy C69430
or ASTM B 99 Alloy C65100
5. Body Bronze ASTM B 584 Alloy C84400
6. Packing PTFE
7. Body End (2) Bronze ASTM B 584 Alloy C84400
8. O-Ring Seal (2) Fluorocarbon Rubber
9. Seat Ring (2) PTFE
10. Ball Brass ASTM B 124 Alloy C37700 or ASTM B16
Alloy C36000 EACH with Hard Chrome Plate
11. Thrust Washer Reinforced PTFE
12. Body Bolts Zinc Dichromate Plated Steel
ASTM A 449 Grade 5
13. Body Nuts Zinc Dichromate Plated Steel
ASTM A 449 Grade 5
Note: valves are static grounded by a grounding washer. (not shown)
DIMENSIONS—WEIGHTS—QUANTITIES
Dimensions
Size A B C D E G-595-Y Master
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty.
1 ½ 40 5.87 149 3.00 76 1.50 38 2.97 75 6.69 170 6.02 2.73 10
2 50 6.64 169 4.00 102 2.00 51 3.63 92 6.69 170 10.48 4.76 4
2 ½ 65 7.78 198 5.00 127 2.50 64 4.09 104 8.00 203 18.30 8.30 2
G-595-Y
GRVD x GRVD
CONFORMS TO MSS SP-110
Bronze Ball Valves
Dezincification
Resistant
WARNING: This product can expose you to chemicals including lead, which is known to the State
of California to cause cancer and birth defects or other reproductive harm. For more information go
to www.P65Warnings.ca.gov.
Revised 7/19/2018