Buying Guide

ManualsBrandsNIBCO ManualsBall Valves1-1/4 in. Brass Lead-Free Solder Two-Piece Full Port Ball Valve

AHEAD OF THE FLOW

Specialty Valve Products

C-SVP-1018

Summary of content (32 pages)

PAGE 1
C-SVP-1018 A H E A D O F T H E F LO W ® S p e c i a l t y Va l v e P r o d u c t s
PAGE 2
Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services be continuously developed and introduced to keep our customers at the center of our business efforts. NIBCO provides an entire suite of business-to-business solutions that is changing the way we interact with customers. NIBCOpartner.
PAGE 3
www.nibco.com AHEAD OF THE F L O W® Table of Contents Visit our website for the most current information . Page Two Piece Ball Valves T/S-580-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 T/S-FP-600-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 S-FP-600-AD . . . . . . . . . . . . . . . . . . . . .
PAGE 4
www.nibco.
PAGE 5
www.nibco.com AHEAD OF THE F L O W® Brass Ball Valves Two-Piece Body • Full Port • Blowout-Proof Stem • PTFE Seats ¹⁄₄"-2" 600 PSI/41.4 Bar Non-Shock Cold Working Pressure 2¹⁄₂"-4" 400 PSI/27.6 Bar Non-Shock Cold Working Pressure CSA CERTIFIED TO ASME B16.44 AND CR91-002 (THREADED Z\v"-4") • UL LISTED (THREADED Z\v"-4") • FM APPROVED (THREADED Z\v"-2") • CRN: 0C19353.5XX* Threaded CSA (Z\v" - 4"): • CR91-002: ¹⁄₂ psig, 2 psig, and 5 psig (these are specific approved categories) • ASME B13.
PAGE 6
www.nibco.com AHEAD OF THE F L O W® Brass Ball Valves Two-Piece Body • Full Port • Blowout-Proof Stem • PTFE Seats • w/ Drain 600 PSI/41.4 Bar Non-Shock Cold Working Pressure MATERIAL LIST PART SPECIFICATION 1. Body 2. End Cap 3. Ball Seat 4. Ball 5. Stem 6. Stem Packing 7. Packing Nut 8. Lever Handle 9. Handle Nut 10. Drainable Cap 11.
PAGE 7
www.nibco.com AHEAD OF THE F L O W® Gas Ball Valve GB10*/GB1A Female x Female, Lever Handle • CSA Certified to Z\x PSI for indoor appliance connections per ANSI Z21.15/CSA 9.1 • 5 PSI for indoor shutoff per CGA CR91-002 and ASME B16.44 • 600 PSI CWP Rated MATERIAL LIST PART SPECIFICATION Forged Brass1 CU>57% Forged Brass1 CU>57% PTFE, Glass Reinforced Brass, Chrome Plated Brass Nitrile Aluminum, Painted Red Steel, Plated Aluminum 1. Body 2. End Piece 3. Seat 4. Ball 5. Stem 6. O-Ring 7.
PAGE 8
www.nibco.com AHEAD OF THE F L O W® Gas Ball Valve GBV38M*/GBVA12M — Flare x MPT, Lever Handle • CSA Certified to Z\x PSI for indoor appliance connections per ANSI Z21.15/CSA 9.1 • 5 PSI for indoor shut-off per ASME B16.44 and CGA CR91-002 MATERIAL LIST PART SPECIFICATION 1. Body 2. End Piece 3. Seat 4. Ball 5. Stem 6. O-Ring 7. Handle 8. Nut 9.
PAGE 9
www.nibco.com AHEAD OF THE F L O W® Quarter-Turn Boiler Drains 125 lb. CWP to 100°F Maximum Temperature 180°F QUARTER-TURN BOILER DRAINS MATERIAL LIST PART SPECIFICATION Screw I.D. Tag Handle Stem O-Ring Seat Ball Adapter Body Steel Aluminum Zinc Brass ASTM B 16 UNS C36000 Nitrile PTFE Brass ASTM B 16 UNS C36000 Brass ASTM B 283 UNS C37700 Brass ASTM B 283 UNS C37700 QT74X QT73X DESCRIPTION NOM. SIZE BOILER DRAIN FIP to Hose Z\x C\v DIMENSIONS A B 2.64" 2.72" APPROX. NET WT. 1.57" .42 lb 1.
PAGE 10
www.nibco.com AHEAD OF THE F L O W® Multi-Turn Boiler Drains 125 lb.
PAGE 11
www.nibco.com AHEAD OF THE F L O W® Hose Bibbs 125 lb. CWP to 100°F Maximum Temperature 180°F QUARTER TURN HOSE BIBBS MATERIALS LIST PART SPECIFICATION Screw I.D. Tag Handle Stem O-Ring Seat Ball Adapter Body Steel Aluminum Zinc Brass ASTM B 16 UNS C36000 Nitrile PTFE Brass ASTM B 16 UNS C36000 Brass ASTM B 283 UNS C37700 Brass ASTM B 283 UNS C37700 QT54X QT56X DIMENSIONS A B APPROX. NET WT. DESCRIPTION Nom. Size NO-KINK HOSE BIB Z\x 3.15" 1.54" .40 lb Male or Cup to Hose C\v 3.15" 1.
PAGE 12
www.nibco.com AHEAD OF THE F L O W® Garden Valves 125 lb.
PAGE 13
www.nibco.com AHEAD OF THE F L O W® Fig. 95C Frostproof Sillcock Chrome Plated Brass Body • 180° Turn • Ceramic Seats • Built in Lockshield • Flow Indicator on Metal Handwheel ASSE 1019-C MATERIAL LIST PART 1. Handwheel 2. ID Plate 3. Screw 4. Bonnet 5. O-Ring 6. Lockshield 7. Washer Seal 8. Stem 9. Screw 10. V-Clip 11. V-Cup Seal 12. Housing 13. O-Ring 14. Seal Washer 15. Inner Stem 16. Seat 180° 17. Movement 180° 18. Washer 19. Washer 20. Spring Check Valve 21. Valve Base 22.
PAGE 14
www.nibco.com AHEAD OF THE F L O W® QTX Series Quarter-Turn Low Pressure Sillcocks • IAPMO Listed to cUPC® MATERIAL LIST PART SPECIFICATION Screw I.D. Tag Handle Stem O-Ring Seat Ball Adapter Body Steel Aluminum Zinc Brass ASTM B 16 UNS C36000 Nitrile PTFE Brass ASTM B 16 UNS C36000 Brass ASTM B 283 UNS C37700 Brass ASTM B 283 UNS C37700 QT63X QT763IX DIMENSIONS APPROX. NET WT. DESCRIPTION Nom. Size A ANGLE SILLCOCK Z\x 1.38" 1.77" .44 lb C\v 1.38" 1.85" .48 lb DESCRIPTION Nom.
PAGE 15
www.nibco.com AHEAD OF THE F L O W® 200 PSI CWP Bronze Gate Valves Valve Dezincification Resistant Bronze Body •Screw-in Bonnet • Non-Rising Stem • Solid Wedge • Compact Design• Full Port 200 PSI/14 Bar Non-Shock Cold Working Pressure MATERIAL LIST PART SPECIFICATION 1. Handwheel Screw 2. Handwheel 3. Stem 4. Stem O-Ring 5. Bonnet 6. Wedge 7.
PAGE 16
www.nibco.com AHEAD OF THE F L O W® Brass Gate Valve Brass Body • Non-Rising Stem • Full Port 200 PSI/14 Bar Non-Shock Cold Working Pressure MATERIAL LIST PART SPECIFICATION 1. Nut 2. Name Plate 3. Handwheel 4. Stem 5. Packing Nut *6. Gland 7. Packing 8. Bonnet 9. Lock Nut 10. Wedge 11. Body TI-8 Steel plated ASTM A 108 Alloy G10100 Aluminum ASTM B 209 Alloy 1100 Cast Iron ASTM A 48 Class No.
PAGE 17
www.nibco.com AHEAD OF THE F L O W® Bronze Ring Check® Valve Dezincification Resistant Inline Lift Type • Resilient Discs • Spring Actuated 125 PSI/9 Bar Saturated Steam (PTFE Disc only) 200 PSI/14 Bar Non-Shock Cold Working Pressure MATERIAL LIST PART 1. Body 2. Stem 3. Spring 4. Disc Holder 5. Disc 6. Seat Screw 7.
PAGE 18
www.nibco.com AHEAD OF THE F L O W® Brass Check Valves Brass Body • Swing Type Check 200 PSI/14 Bar Non-Shock Cold Working Pressure MATERIAL LIST PART 1. 2. 3. 4. Bonnet Plug Pin Disc 5.
PAGE 19
www.nibco.com AHEAD OF THE F L O W® Washer Box Valves 125 lb. CWP to 100°F • Maximum Temperature 180°F MATERIAL LIST PART 1. Handle Screw 2. Handle 3. Packing Nut 4. Packing 5. Bonnet 6. Body 7. Stem 8. Seat 9. Seat Screw 10.
PAGE 20
www.nibco.com AHEAD OF THE F L O W® PVC Ball Valves One-Piece Molded PVC Body • Threaded or Socket Ends 150 PSI/10.3 Bar Non-Shock Cold Working Pressure to 73° F/23° C NSF Listed to NSF/ANSI 14 MATERIAL LIST PART SPECIFICATION 1. Handle Cap 2. Screw 3. Handle 4. O-Ring 5. Seat Seal 6. Ball 7.
PAGE 21
www.nibco.com AHEAD OF THE F L O W® CPVC-CTS Ball Valve One-Piece Molded CPVC Body • Socket Ends 150 PSI/10.3 Bar Non-Shock Cold Working Pressure to 73° F/23° C NSF Listed to NSF/ANSI 61 MATERIAL LIST PART 1. Handle Cap 2. Screw 3. Handle 4. O-Ring 5. Seat (2) 6. Ball 7. Body SPECIFICATION ABS Zinc Plated Steel ABS EPDM PTFE CPVC CPVC 4770 Socket Weld 4770 Socket x Socket DIMENSIONS—WEIGHTS Dimensions Size A B C D E Weight In. mm. In. mm. In. mm. In.
PAGE 22
www.nibco.com AHEAD OF THE F L O W® ™ Protect Your Water Supply Perfect for use in your: Front & Backyard, Vacation Home, Condo, Apartment House, Dock, Campsite, Storefront, School, Trailer Park, Parking Lot, Gas Station... Save Water ... Save Money FaucetLock™ Fits standard C\v " hose thread Extra Key Included No Tools Required Twist On & Lock PATENT PENDING Installation Instructions 1. Inspect FaucetLock’s threads for dirt and debris, and clean if necessary. 2.
PAGE 23
www.nibco.com AHEAD OF THE F L O W® Low Pressure Valve Handwheel Options & Accessories Standard No Kink and Hose Bibbs Tee Handle Sizes Z\x"- C\v". Available as standard for all NIBCO valves with spline drive. Blue or silver color Cross Handles for the Classic Pro and T or S29 Valves Available for Classic Pro or T/S 29 Valves Z\x" thru 2". Used where standard handwheel would be out of reach or hand space is restricted. For field replacement, specify valve type and size. Spline drive only.
PAGE 24
www.nibco.com AHEAD OF THE F L O W® Installation Instructions for Metal Connections Analyze the application to determine which valve is best suited for installation, keeping in mind the service for which the valve is recommended. Before installing the correct valve, review the following installation instructions to prevent damage to the valve and assure its maximum efficiency. For Plastic Installation Instructions, contact Technical Services at 1.888.446.4226. 4. Be sure that valve is fully open.
PAGE 25
www.nibco.com AHEAD OF THE F L O W® Installation Instructions for Metal Connections (cont.) 1. Cut tube end square to exact length needed, so that tube will enter valve socket all the way to the shoulder. Ream, burr and file. 2. Clean tube to a distance slightly more than what will fit into the socket, and clean valve socket. Wire brushes may be used, but avoid removing an excessive amount of metal. Fine sand cloth or emery cloth may be used with the same precautions. Steel wool is not recommended.
PAGE 26
www.nibco.com AHEAD OF THE F L O W® Installation Instructions for Frostproof Sillcock HOW THE FIGURE 95C WORKS TIPS FOR LONG LIFE As shown on the schematic drawing on the right, the closing member (stem and disc assembly) of the Figure 95C Frostproof Sillcock operates by turning the handle in a clockwise manner to close and counter-clockwise to open. 1. The hose should be carefully moved about, so as not to cause abnormal tension via pulling and/or jerking.
PAGE 27
www.nibco.
PAGE 28
www.nibco.com AHEAD OF THE F L O W® Figure Number Comparison Low Pressure Plumbing Valves For use as a guide only — some differences in design and materials are possible NIBCO Arrowhead AY McDonald‡ B&K‡ Hammond‡ Legend‡ QT56X 301/302 61 QT63X 900/925 255/355 2003 2015 108-000 108-100 1035 1032 T-543 T-541 QT763X 255SW 2014 108-500 1034 S-541 712 710 S-521 S-524 T-522 T-521 72 74-2 73CL 74CL Mansfield Matco-Norca‡ Red & White‡ 44.
PAGE 29
www.nibco.com AHEAD OF THE F L O W® Notes NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455 www.nibco.
PAGE 30
www.nibco.com AHEAD OF THE F L O W® NIBCO ® Specialty Valve Products Warranty Revised 1/1/2014 NIBCO INC. LIMITED WARRANTY Applicable to NIBCO INC. Specialty Valve Products Only NIBCO INC. warrants each NIBCO ® specialty valve products to be free from defects in materials and workmanship under normal use and service for a period of two (2) years from date of purchase.
PAGE 31
globally connecting you at all levels It’s a new age of business, and a new way at NIBCO. From Elkhart, Indiana to Lodz, Poland, and points beyond, our company has integrated manufacturing, distribution, and networked communications to provide a seamless source of information and service, 24 hours a day, 7 days a week. But this integration hasn’t happened overnight.
PAGE 32
C-SVP-1018 VALVES Pressure-rated bronze, iron and alloy-iron gate, globe and check valves • Pressurerated bronze ball valves • Boiler specialty valves • Commercial and industrial butterfly valves • Lined butterfly valves • Circuit balancing valves • Carbon and stainless steel ball valves • ANSI flanged steel ball valves • Lined ball valves • Pneumatic and electric actuators and controls • Grooved ball and butterfly valves • High performance butterfly valves • UL/FM fire protection valves • MSS specificati