Buying Guide

83
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
Visit our website for the most current information.
www.nibco.com
AHEAD OF THE FLOW
®
u
For detailed operating pressure, refer to pressure temperature chart on page 86.
Class 300 Stainless Steel Flanged Ball Valves
Unibody Design • Blowout-Proof Stem • 316 SS Trim • Mounting Pad • Fire Safe • Vented Ball
720 PSI/50 bar non-shock cold working pressure
t
CONFORMS TO ASME/ANSI B16.34, B16.5, MSS SP 72,
API 607 FOURTH EDITION, API 608, API 598,
MSS SP 25
F-530-S6-R-66-FS
Stainless x Stainless
Flanged
MATERIAL LIST
PART SPECIFICATION
1.
1
Body and End Piece Stainless Steel ASTM A 351 Type CF8M
2.
1
Ball (Vented) Stainless Steel ASTM A 351 Type CF8M
3. Stem Stainless Steel ASTM A 276 Type 316
4. Seat Reinforced PTFE
5. Packing Set Graphite and Braided Graphite
6. Pack Gland Stainless Steel 304 SS
7. Pack Gland Nut Stainless Steel
8. O-Ring Fluorocarbon Encapsulated
9. Gasket 304 SS/Graphite Spiral Wound
1
Cast specifications shown. Smaller sizes may be manufactured from equivalent bar
stock specifications.
DIMENSIONS—WEIGHTS—QUANTITIES
Dimensions
Size A B C D E F
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm.
½ 15 5.50 140 2.13 54 .59 15 3.81 97 .50 13 .43 11
¾ 20 6.00 152 2.31 59 .65 17 4.68 119 .75 19 .63 16
1 25 6.50 165 2.50 64 .71 18 4.94 125 1.00 25 .81 21
1 ½ 40 7.50 191 3.25 83 .81 21 6.13 156 1.50 33 1.19 30
2 50 8.50 216 3.00 76 .87 22 6.50 165 2.00 51 1.50 38
3 80 11.13 283 4.00 102 1.13 29 8.25 210 3.00 76 2.38 60
4 100 12.00 305 4.25 108 1.25 32 10.00 254 4.00 102 3.00 76
6 150 15.88 403 5.25 133 1.44 37 12.50 318 6.00 152 4.38 111
8 200 16.50 419 5.50 140 1.63 41 15.00 381 8.00 203 5.68 144
10 250 18.00 457 6.50 165 1.88 48 17.50 443 10.00 254 7.50 190
Dimensions
Size G H I J K L M O P F-530-S6-R-66-FS
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. N In. mm. In. mm. Lbs. Kg.
½ 15 6.63 168 2.84 72 3.16 80 2.56 65 .59 15 .25 6 1.68 43 .250-20 1.19 30 1.19 30 5.00 2.27
¾ 20 6.63 168 3.20 81 3.58 91 2.56 65 .76 19 .25 6 1.68 43 .250-20 1.19 30 1.19 30 8.00 3.64
1 25 6.63 168 3.45 88 3.83 97 2.56 65 .93 24 .31 8 1.68 43 .250-20 1.19 30 1.19 30 10.00 4.55
1 ½ 40 9.13 232 4.75 121 5.25 133 3.31 84 1.22 31 .56 14 2.06 52 .250-20 1.46 37 1.46 37 20.00 9.09
2 50 9.13 232 4.88 124 5.38 137 3.31 84 1.36 35 .56 14 2.06 52 .250-20 1.46 37 1.46 37 23.00 10.45
3 80 16.60 422 6.16 156 — — — — 1.97 50 .68 17 3.00 76 .375-16 2.12 54 2.12 54 54.00 24.55
4 100 16.60 422 7.22 183 — — — — 2.16 55 .68 17 3.00 76 .375-16 2.12 54 2.12 54 91.50 41.59
6 150 — — — — — — — — 3.59 91 1.13 29 4.50 114 .500-13 3.18 81 3.18 81 181.50 82.50
8 200 — — — — — — — — 3.43 87 1.13 29 4.50 114 .500-13 3.18 81 3.18 81 257.00 116.82
10 250 — — — — — — — — 5.56 141 1.75 44 — — .625-11 7.24 184 3.66 93 429.00 195.00
Note: valves are static grounded by thrust washer.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other
reproductive harm. For more information go to www.P65Warnings.ca.gov.
Revised 7/19/2018