Buying Guide

8
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
Visit our website for the most current information.
www.nibco.com
AHEAD OF THE FLOW
®
Dezincification
Resistant
Bronze Ball Valves
One-Piece Body • Reduced Port • Stainless Trim • Vented Ball • Blowout-Proof Stem
600 PSI/41.4 bar non-shock cold working pressure
t
CONFORMS TO MSS SP-110
T-560-BR-R/Y-66
Threaded
MATERIAL LIST
PART SPECIFICATION
1. Handle Nut Stainless Steel 300 Series
2. Identification Plate Aluminum
3. Handle Zinc Plated Steel Clear Chromate
Plastisol Coated
4.
1
Packing Nut Stainless Steel
5. Belleville Washer Zinc Plated Steel
6. Travel Stop Zinc Dichromate Plated Steel
7. Pack Gland Stainless Steel ASTM A 167 Type 316
8. Packing Reinforced PTFE
9. Grounding Washer Stainless Steel ASTM A 240 Type 304
10. Thrust Washer Reinforced PTFE
11. Stem Stainless Steel ASTM A 276 Type 316
12. Ball (Vented) Stainless Steel ASTM A 276 Type 316
or ASTM A 351 Type CF8M
13. Seat Ring (2) PTFE (Y) or Reinforced PTFE (R)
14. Body Insert Bronze ASTM B 584 Alloy C84400
15. Body Bronze ASTM B 584 Alloy C84400
16. Body End Piece Brass ASTM B 16 Alloy C36000 (not shown)
¼ and ⅜ size only
1
¼"-¾" ASTM A 582 type 416. 1"-2" 300 series.
DIMENSIONS—WEIGHTS—QUANTITIES
Dimensions
Size A B C D E F G T-560-BR-R/Y-66 Master
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. Lbs. Kg.
¼ 8 2.63 67 1.34 34 1.63 41 .38 10 4.00 102 1.22 31 10-24 .66 .30 50
⅜ 10 2.63 67 1.34 34 1.63 41 .38 10 4.00 102 1.22 31 10-24 .63 .29 50
½ 15 2.63 67 1.34 34 1.63 41 .38 10 4.00 102 1.22 31 10-24 .59 .27 50
¾ 20 2.88 73 1.50 38 1.71 43 .50 13 4.00 102 1.22 31 10-24 .82 .37 50
1 25 3.31 84 1.71 43 2.00 51 .63 16 4.69 119 1.34 34 ¼-20 1.36 .62 40
1 ¼ 32 3.84 98 1.97 50 2.06 52 .81 21 4.69 119 1.50 38 ¼-20 2.01 .91 20
1 ½ 40 4.03 102 2.03 52 2.56 65 1.00 25 6.75 171 1.63 41 ¼-20 2.75 1.25 20
2 50 4.59 117 2.28 58 2.75 70 1.25 32 6.75 171 2.06 52 ¼-20 4.16 1.89 10
Note: G holes are only tapped for actuated valves.
T-560-BR-R/Y-66
NPT x NPT
Ctn. Qty.
t
For detailed operating pressure, refer to pressure temperature chart on page 41.
Revised 7/19/2018
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause
cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.