Buying Guide

64
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
Visit our website for the most current information.
www.nibco.com
AHEAD OF THE FLOW
®
uFor detailed operating pressure, refer to pressure temperature chart on pages 71 and 72.
Stainless Steel Ball Valves
Two-Piece Body • Conventional Port • Blowout-Proof Stem •
316 SS Trim • Cast Mounting Pad • Vented Ball
2000 PSI/138 bar non-shock cold working pressure
t
CONFORMS TO MSS SP-110
T-580-S6-R-66-LL
Threaded
MATERIAL LIST
PART SPECIFICATION
1. Handle Nut Stainless Steel ASTM A 276 Type 304
2. Stem Stainless Steel ASTM A 276 Type 316
3. Lock Washer Stainless Steel 304 SS
4. Threaded Pack Gland Stainless Steel ASTM A 276 Type 316
5. Thrust Washer Carbon Filled PTFE
6. Gasket PTFE
7. Body End Piece Stainless Steel ASTM A 351 Type CF8M
8. Ball (Vented) Stainless Steel ASTM A 276 Type 316
or ASTM A 351 Type CF8M
9. Seat (2) Reinforced PTFE
10. Body Stainless Steel ASTM A 351 Type CF8M
11. Stem Packing (2) Carbon Filled PTFE
12. Locking Handle Stainless Steel ASTM A 240 Type 304
NOTE: valves are static grounded by thrust washer and packing.
Valves tested in accordance with ASME B16.34
T-580-S6-R-66-LL
NPT x NPT
Dimensions
SIZE A B D H L Weight
Master
Ctn. Qty.
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg.
¼
8 2.07 53 0.83 21 0.37 9 4.33 110 1.76 45 0.51 0.23 10
⅜
10 2.07 53 0.83 21 0.37 9 4.33 110 1.76 45 0.48 0.22 10
½
15 2.34 59 1.06 27 0.5 13 4.33 110 1.92 49 0.66 0.3 10
¾
20 2.8 71 1.34 34 0.69 18 5.83 148 2.4 61 1.3 0.59 10
1 25 3.23 82 1.61 41 0.87 22 5.83 148 2.56 65 1.79 0.81 10
1
¼
32 3.57 91 1.89 48 1 25 7.76 197 2.74 70 2.52 1.14 5
1 ½
40 4.04 103 2.26 57 1.25 32 7.76 197 2.98 76 3.75 1.7 5
2 50 4.63 118 2.76 70 1.5 38 7.76 197 3.17 81 5.8 2.63 5
DIMENSIONS—WEIGHTS
Revised 11/20/2017