Buying Guide

14
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
Visit our website for the most current information.
www.nibco.com
AHEAD OF THE FLOW
®
Bronze Ball Valves
Two-Piece Body • Full Port • Bronze Trim • Male x Female Thread Ends • Blowout-Proof Stem
600 PSI/41.4 bar non-shock cold working pressure
150 PSI/10.3 bar saturated steam
t
CONFORMS TO MSS SP-110
MTT-585-70
Male x Female NPT
MATERIAL LIST
PART SPECIFICATION
1. Handle Nut Zinc Plated Steel
2. Handle Zinc Plated Steel Clear Chromate
Plastisol Coated
3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000
4. Packing PTFE
5. Thrust Washer Reinforced PTFE
6. Stem Silicon Bronze ASTM B 371 Alloy C69300
or ASTM B 99 Alloy C65100
7. Ball Brass ASTM B 124 Alloy C37700 or ASTM B16
Alloy C36000 EACH with Hard Chrome Plate
8. Seat Ring (2) Reinforced PTFE
9. Body Bronze ASTM B 584 Alloy C84400
10. Male Body End Brass ASTM B 16 Alloy C36000
11. Cap Plug Low Density Polyethylene
DIMENSIONS—WEIGHTS—QUANTITIES
Dimensions
Size A B C D MTT-585-70 Master
In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty.
¼ 8 2.41 61 5.30 135 1.75 44 .38 10 .43 .19 40
⅜ 10 2.40 61 5.30 135 1.72 44 .38 10 .52 .24 40
½ 15 2.80 71 5.50 140 1.88 48 .50 13 .78 .35 40
¾ 20 3.40 86 6.59 167 2.25 57 .75 19 1.54 .70 20
1 25 4.00 102 6.99 178 2.38 60 1.00 25 2.71 1.23 20
1 ¼ 32 4.58 116 9.18 233 3.00 76 1.25 32 3.56 1.62 10
1 ½ 40 5.20 132 9.53 242 3.16 80 1.50 38 5.34 2.42 6
2 50 5.49 139 9.61 244 3.50 89 2.00 51 6.83 3.10 4
MTT-585-70
Male x Female NPT
t
For detailed operating pressure, refer to pressure temperature chart on page 41.
Revised 7/19/2018
WARNING: This product can expose you to chemicals including lead, which
is known to the State of California to cause cancer and birth defects or other
reproductive harm. For more information go to www.P65Warnings.ca.gov.