Buying Guide

85
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
Visit our website for the most current information.
www.nibco.com
AHEAD OF THE FLOW
®
Dimensions
Size G H J K L O *P Q R F-535-S6-F-66-FS
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. N In. mm. In. mm. In. mm. In. mm. Lbs. Kg.
½ 15 5.12 130 3.52 89 .34 9 1.00 25 .19 5 .250-20 — — — — 4.85 123 2.00 51 7.00 3.18
¾ 20 6.10 155 4.13 105 .43 11 1.26 32 .31 8 .250-20 — — — — 5.28 134 2.00 51 9.00 4.09
1 25 6.10 155 4.25 108 .45 11 1.26 32 .31 8 .312-18 — — — — 5.69 145 1.75 44 11.00 5.00
1 ½ 40 9.06 230 4.97 126 .92 23 1.68 43 .47 12 .312-18 — — — — 6.56 167 1.75 44 24.50 11.14
2 50 9.06 230 5.66 144 1.58 40 1.66 42 .63 16 .312-18 — — — — 7.50 191 2.25 57 33.00 15.00
3 80 15.75 400 7.38 187 2.26 57 2.13 54 .78 20 .375-16 4.13 105 1.57 40 9.94 252 3.50 89 72.00 32.73
4 100 15.75 400 8.09 205 2.10 53 2.13 54 .78 20 .437-14 4.13 105 1.57 40 10.69 272 4.00 102 116.00 52.73
6 150 — — — — 2.93 74 2.58 66 1.10 28 .437-14 4.96 126 2.36 60 14.38 365 4.00 102 228.00 103.64
8 200 — — — — 4.43 113 2.53 65 1.17 30 .500-13 4.96 126 2.36 60 18.06 459 6.46 154 352.00 160.00
10 250 — — — — 5.08 129 3.01 76 1.57 40 .625-11 5.90 150 2.75 70 20.43 514 8.66 220 560.00 254.53
12 300 — — — — 4.97 126 3.01 76 1.57 40 .625-11 5.90 150 2.75 70 23.44 595 9.45 240 765.00 347.73
* Not drilled and tapped on ½"-2". Note: valves are static grounded by thrust washer.
Class 300 Stainless Steel Flanged Ball Valves
Split-Body, Full-Bore Design • Blowout-Proof Stem • 316 SS Trim • Mounting Pad • Fire Safe • Vented Ball
720 PSI/50 bar non-shock cold working pressure
t
CONFORMS TO ASME/ANSI B16.34, B16.5, MSS SP 72,
API 607 FOURTH EDITION, API 608, API 598,
MSS SP 25
F-535-S6-F-66-FS
Stainless x Stainless
Flanged
MATERIAL LIST
PART SPECIFICATION
1. Body and End Piece Stainless Steel ASTM A 351 Type CF8M
2.
1
Ball (Vented) Stainless Steel ASTM A 351 Type CF8M
3. Stem Stainless Steel ASTM A 276 Type 316
4. Seat Carbon Filled PTFE
5. Packing Set Graphite and Braided Graphite
6. Pack Gland Stainless Steel ASTM A 276 Type 316
7. Gasket 304 SS/Graphite Spiral Wound
8. Body Stud Stainless Steel ASTM A 193 Grade B8 SS
9. Heavy Hex Body Nut Stainless Steel ASTM A 194 Grade 8 SS
10. Belleville Washer Stainless Steel
1
Cast specifications shown. Smaller sizes may be manufactured from equivalent bar
stock specifications.
DIMENSIONS—WEIGHTS—QUANTITIES
Dimensions
Size A B C D E
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm.
½ 15 5.50 140 3.14 80 .56 14 3.75 95 .59 15
¾ 20 6.00 152 3.43 81 .62 16 4.63 118 .78 20
1 25 6.50 165 3.55 90 .69 18 4.88 124 .98 25
1 ½ 40 7.50 191 4.13 105 .81 21 6.13 156 1.57 40
2 50 8.50 216 4.74 120 .88 22 6.50 165 2.00 51
3 80 11.12 253 5.56 141 1.12 28 8.25 210 3.00 76
4 100 12.00 305 6.01 156 1.25 32 10.00 254 4.00 102
6 150 15.87 403 7.96 202 1.44 37 12.50 318 6.00 152
8 200 19.75 502 9.87 251 1.62 41 15.00 381 8.00 203
10 250 22.38 569 11.19 234 1.88 48 17.50 445 10.08 256
12 300 25.50 649 12.75 324 2.00 51 20.50 521 12.09 307
1/2"-8"
10"-12"
u
For detailed operating pressure, refer to pressure temperature chart on page 86.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other
reproductive harm. For more information go to www.P65Warnings.ca.gov.
Revised 7/19/2018