Buying Guide

57
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
Visit our website for the most current information.
www.nibco.com
AHEAD OF THE FLOW
®
Carbon Steel Ball Valves
Three-Piece Body • Threaded, Butt or Socket Weld Ends • Blowout-Proof Stem • Conventional Port •
Enclosed Bolt Design • PTFE Seats • SS Trim • Cast ISO Mounting Pad • Vented Ball • Fire Safe
2000 PSI/138 Bar Non-Shock Cold Working Pressure
t
TM-590-CS-R-66-FS-LL
Threaded
Stainless Steel Trim
ISO Mount Pad
KM-590-CS-R-66-FS-LL
Socket Weld
Stainless Steel Trim
ISO Mount Pad
BM-590-CS-R-66-FS-LL
Butt Weld
Stainless Steel Trim
ISO Mount Pad
MATERIAL LIST
PART SPECIFICATION
1. Stem Stainless Steel ASTM A 276 Type 316
2. Handle Nut Stainless Steel ASTM A 276 Type 304
3. Lock Washer Stainless Steel ASTM A 240 Type 304
4. Locking Handle Stainless Steel ASTM A 240 Type 304
5. Stop Plate Stainless Steel ASTM A 240 Type 304
6. Pack Gland Stainless Steel ASTM A 276 Type 316
7. Stem Packing Graphite
8. Body End Seal Graphite
9. Bolt Carbon Steel ASTM A 193 Grade B7
10. Body End Carbon Steel ASTM A 216 Grade WCB
Phosphate Coated
11. Body Carbon Steel ASTM A 216 Grade WCB
Phosphate Coated
12. Ball (Vented) Stainless Steel ASTM A 276 Type 316 or
ASTM A 351 Type CF8M
13. Seat Reinforced PTFE 15% Glass
14. Thrust Washer Reinforced PTFE 15% Glass
15. Static Grounding Devices Stainless Steel ASTM A 276 Type 304
16. Stop Pin Stainless Steel ASTM A 276 Type 304
Note: valves are static grounded by two ball detents that insure electro-continuity
between the stem body and ball. The valve has electro-continuity across the
discharge path with a resistance of not more than 10 ohms.
CONFORMS TO API-607 FOURTH EDITION FIRE
SAFE • MSS SP-110 • MSS SP-72 (BUTT WELD) •
API 608 ANTI-STATIC FEATURE
TM 590-CS-R-66-FS-LL
NPT x NPT
DIMENSIONS—WEIGHTS—QUANTITIES
Dimensions
H J K Socket Butt
G Socket Socket Butt Threaded Weld Weld
Size A B C D E F Thread Flange Weld Weld Weld Weight Weight Weight
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Tap Type In. mm. In mm. In. mm. Lbs. Kg. Lbs. Kg. Lbs. Kg.
½ 15 2.72 69 2.47 63 4.07 103 .43 11 .12 3 1.00 25 M5 F03 .86 22 .38 10 .84 21 1.80 .82 1.70 .78 1.60 .73
¾ 20 2.94 75 2.70 69 4.07 103 .57 14 .12 3 1.00 25 M5 F03 1.08 27 .50 13 1.05 27 2.40 1.09 2.30 1.05 2.20 1.00
1 25 3.50 89 3.19 81 4.92 125 .81 21 .18 5 1.17 30 M5 F04 1.34 34 .50 13 1.32 34 3.80 1.73 3.60 1.64 3.50 1.59
1 ¼ 32 3.90 99 3.64 92 5.91 150 .98 25 .20 5 1.17 30 M5 F04 1.69 43 .50 13 1.66 42 5.90 2.68 5.70 2.59 5.60 2.55
1 ½ 40 4.42 112 3.88 99 7.68 195 1.25 32 .23 8 1.39 35 M6 F05 1.93 49 .50 13 1.90 48 7.60 3.45 7.40 3.36 7.30 1.61
2 50 5.04 128 4.09 104 7.68 195 1.50 38 .23 8 1.39 35 M6 F05 2.42 61 .62 16 2.38 60 10.50 4.77 10.30 4.68 10.20 4.64
uFor detailed operating pressure, refer to pressure temperature chart on pages 71 and 72.
Revised 11/20/2017