Buying Guide

25
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
Visit our website for the most current information.
www.nibco.com
AHEAD OF THE FLOW
®
Dezincification
Resistant
Bronze Ball Valves
Three-Way Body • Full Port ½"-1" • Conventional Port 1¼"-2" •
3-Way Bronze Ball Valve • 316SS Trim • Blowout-Proof Stem •
Vented Ball
400 PSI/27.6 bar non-shock cold working pressure
CONFORMS TO MSS SP-110
T-585-70-66-W3
Threaded
MATERIAL LIST
PART SPECIFICATION
1. Handle Zinc Plated Steel Clear Chromate
Plastisol Coated
2. Handle Nut Stainless Steel 300 Series
3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000
4. Packing PTFE
5. Thrust Washer Reinforced PTFE
6. Stem Stainless Steel ASTM A 276 Type 316
7. Seat Ring (2) Reinforced PTFE
8. Ball (Vented) Stainless Steel ASTM A 276 Type 316
or ASTM A 351 Type CF8M
9. Body Bronze ASTM B 584 Alloy C84400
10. Body End Piece Bronze ASTM B 584 Alloy C84400
DIMENSIONS—WEIGHTS—QUANTITIES
T-585-70-66- W3 Dimensions
Size A B C D E F Thread G H I J T-585-70-66-W3 Master
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty.
½ 15 2.44 62 1.88 48 5.19 132 .50 13 1.22 31 .69 18 10-24 .88 22 .65 17 .51 13 1.45 37 .84 .38 50
¾ 20 2.94 75 2.25 57 6.25 159 .75 19 1.45 37 .69 18 10-24 .88 22 .85 22 .57 14 1.80 46 1.62 .73 25
1 25 3.34 85 2.38 60 6.44 164 1.00 25 1.69 43 .69 18 10-24 .88 22 1.05 27 .57 14 1.97 50 2.28 1.03 20
†1 ¼ 32 4.19 106 3.00 76 6.75 171 1.12 28 1.98 50 .75 19 1/4-20 .94 24 1.23 31 .87 22 2.60 66 4.19 1.90 10
†1 ½ 40 4.72 120 3.16 80 9.06 230 1.38 35 2.38 60 .75 19 1/4-20 .94 24 1.48 38 .87 22 2.84 72 6.00 2.72 8
†2 50 5.31 135 3.50 89 9.25 235 1.88 48 2.75 70 .75 19 1/4-20 .94 24 1.88 48 .70 18 3.14 80 9.03 4.09 4
† NIBCO supplies conventional port T-580-70-66-W3 on this size.
S-585-70-66-W3 Dimensions
Size A B C D E J S-585-70-66-W3 Master
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty.
½ 15 2.56 65 1.88 48 5.19 132 .50 13 1.08 27 1.45 37 .67 .30 50
¾ 20 3.25 83 2.25 57 6.25 159 .75 19 1.50 38 1.80 46 1.35 .61 25
1 25 3.75 95 2.38 60 6.63 168 1.00 25 1.85 47 1.97 50 2.07 .94 20
S-585-70-66-W3
Solder
Flow Pattern
Lever Position
S-585-70-66-W3
C x C
T-585-70-66-W3
NPT x NPT
Note: Open port pressure must exceed closed port pressure. If closed port
pressure exceeds open port pressure, ball may be forced off of the seat ring
which could allow mixing from all ports.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause
cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Revised 12/10/2020