Buying Guide

24
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
Visit our website for the most current information.
www.nibco.com
AHEAD OF THE FLOW
®
Dezincification
Resistant
Bronze Ball Valves
Three-Way Body • Full Port ½"-1" • Conventional Port 1¼"-2" •
3-Way Bronze Ball Valve • Bronze Trim • Blowout-Proof Stem
400 PSI/27.6 bar non-shock cold working pressure
CONFORMS TO MSS SP-110
T-585-70-W3
Threaded
MATERIAL LIST
PART SPECIFICATION
1. Handle Zinc Plated Steel Clear Chromate
Plastisol Coated
2. Handle Nut Stainless Steel 300 Series
3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000
4. Packing PTFE
5. Thrust Washer Reinforced PTFE
6. Stem Brass ASTM B 16 Alloy C36000
7. Seat Ring (2) Reinforced PTFE
8. Ball Brass ASTM B 124 Alloy C37700 or ASTM B16
Alloy C36000 EACH with Hard Chrome Plate
9. Body Bronze ASTM B 584 Alloy C84400
10. Body End Piece Bronze ASTM B 584 Alloy C84400
DIMENSIONS—WEIGHTS—QUANTITIES
T-585-70-W3 Dimensions
Size A B C D E F G H I J T-585-70-W3 Master
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty.
½ 15 2.44 62 1.88 48 5.19 132 .50 13 1.22 31 .69 18 .88 22 .65 17 .51 13 1.45 37 .84 .38 50
¾ 20 2.94 75 2.25 57 6.25 159 .75 19 1.45 37 .69 18 .88 22 .85 22 .57 14 1.80 46 1.62 .73 25
1 25 3.34 85 2.38 60 6.44 164 1.00 25 1.69 43 .69 18 .88 22 1.05 27 .57 14 1.97 50 2.28 1.03 20
†1 ¼ 32 4.19 106 3.00 76 6.75 171 1.12 28 1.98 50 .75 19 .94 24 1.23 31 .87 22 2.60 66 4.19 1.90 10
†1 ½ 40 4.72 120 3.16 80 9.06 230 1.38 35 2.38 60 .75 19 .94 24 1.48 38 .87 22 2.84 72 6.00 2.72 8
†2 50 5.31 135 3.50 89 9.25 235 1.88 48 2.75 70 .75 19 .94 24 1.88 48 .70 18 3.14 80 9.03 4.09 4
† NIBCO supplies conventional port T-580-70-W3 on this size.
S-585-70-W3 Dimensions
Size A B C D E J S-585-70-W3 Master
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty.
½ 15 2.56 65 1.88 48 5.19 132 .50 13 1.08 27 1.45 37 .67 .30 50
¾ 20 3.25 83 2.25 57 6.25 159 .75 19 1.50 38 1.80 46 1.35 .61 25
1 25 3.75 95 2.38 60 6.63 168 1.00 25 1.85 47 1.97 50 2.07 .94 20
S-585-70-W3
Solder
Flow Pattern
Lever Position
S-585-70-W3
C x C
T-585-70-W3
NPT x NPT
Note: Open port pressure must exceed closed port pressure. If closed port
pressure exceeds open port pressure, ball may be forced off of the seat ring
which could allow mixing from all ports.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Revised 7/19/2018