Buying Guide

ManualsBrandsNIBCO ManualsBall Valves1 in. Bronze Alloy Lead-Free Solder Two-Piece Full Port Ball Valve

Ball Valves

C-BV-1121

AHEAD OF THE FLOW

Summary of content (120 pages)

PAGE 1
C-BV-1121 AHEAD OF THE FLOW ® Ball Valves
PAGE 2
Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services be continuously developed and introduced to keep our customers at the center of our business efforts. NIBCO provides an entire suite of business-to-business solutions that is changing the way we interact with customers. NIBCOpartner.
PAGE 3
AHEAD OF THE F L O W® www.nibco.com Revised 10/7/2020 Table of Contents Bronze Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-42 Figure Number Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Illustrated Index 1 and 2-Pc. Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . 5 Illustrated Index 3-Pc. Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 4
AHEAD OF THE www.nibco.
PAGE 5
AHEAD OF THE www.nibco.com F L O W® Revised 4/11/2019 One-Piece and Two-Piece Bronze Ball Valves Illustrated Index One-Piece Bronze Ball Valve 600 lb. CWP Two-Piece Bronze Ball Valve 600 lb. CWP Two-Piece Bronze Hose End w/ Cap Ball Valve 600 lb.
PAGE 6
AHEAD OF THE www.nibco.com F L O W® Revised 11/20/2017 Three-Piece Bronze Ball Valve Illustrated Index Three-Piece Bronze Ball Valve 600 lb. CWP Three-Piece Bronze Ball Valve 600 lb. CWP 175 PSI LP Gas Dezincification Resistant Three-Piece Bronze Ball Valve 600 lb.
PAGE 7
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves Dezincification Resistant One-Piece Body • Reduced Port • Bronze Trim • Blowout-Proof Stem 600 PSI/41.4 bar non-shock cold working pressuret CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Identification Plate 3. Handle 4. 1Packing Nut 5. Belleville Washer 6. Travel Stop 7. Pack Gland 8. Packing 9. Grounding Washer 10. Thrust Washer 11. Stem 12. Ball 13. Seat Ring (2) 14. Body Insert 15.
PAGE 8
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves Dezincification Resistant One-Piece Body • Reduced Port • Stainless Trim • Vented Ball • Blowout-Proof Stem 600 PSI/41.4 bar non-shock cold working pressuret CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Identification Plate 3. Handle 4. 1Packing Nut 5. Belleville Washer 6. Travel Stop 7. Pack Gland 8. Packing 9. Grounding Washer 10. Thrust Washer 11. Stem 12. Ball (Vented) 13.
PAGE 9
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves Dezincification Resistant Two-Piece Body • Full Port 1/4"-1" • Conventional Port 11/4"-3" • Bronze Trim • Blowout-Proof Stem 600 PSI/41.4 bar non-shock cold working pressure 150 PSI/10.3 bar saturated steamt CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Packing 5. Stem 6. Thrust Washer 7. Ball 8. Seat Ring (2) 9. Body 10.
PAGE 10
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves Dezincification Resistant Two-Piece Body • Full Port 1/4"-1" • Conventional Port 11/4"-3" • Stainless Trim • Blowout-Proof Stem • Vented Ball 600 PSI/41.4 bar non-shock cold working pressure 150 PSI/10.3 bar saturated steamt CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Packing 5. Stem 6. Thrust Washer 7. Ball (Vented) 8. Seat Ring (2) 9. Body 10.
PAGE 11
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves Dezincification Resistant Two-Piece Body • Full Port • Bronze Trim • Blowout-Proof Stem 600 PSI/41.4 bar non-shock cold working pressure 150 PSI/10.3 bar saturated steamt CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Packing 5. Stem 6. Thrust Washer 7. Ball 8. Seat Ring (2) 9. Body 10.
PAGE 12
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves Dezincification Resistant Two-Piece Body • Full Port • Stainless Trim • Blowout-Proof Stem • Vented Ball 600 PSI/41.4 bar non-shock cold working pressure 150 PSI/10.3 bar saturated steamt CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Packing 5. Stem 6. Thrust Washer 7. Ball (Vented) 8. Seat Ring (2) 9. Body 10.
PAGE 13
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves Dezincification Resistant Two-Piece Body • Full Port • Bronze Trim • Thread x Solder (TS) or Solder x Thread End (ST) • Blowout-Proof Stem 600 PSI/41.4 bar non-shock cold working pressure 150 PSI/10.3 bar saturated steamt CONFORMS TO MSS SP-110 PART MATERIAL LIST SPECIFICATION 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Packing 5. Stem 6. Thrust Washer 7. Ball 8. Seat Ring (2) 9. Body 10.
PAGE 14
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves Two-Piece Body • Full Port • Bronze Trim • Male x Female Thread Ends • Blowout-Proof Stem 600 PSI/41.4 bar non-shock cold working pressure 150 PSI/10.3 bar saturated steamt CONFORMS TO MSS SP-110 PART MATERIAL LIST 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Packing 5. Thrust Washer 6. Stem 7. Ball 8. Seat Ring (2) 9. Body 10. Male Body End 11.
PAGE 15
AHEAD OF THE www.nibco.com F L O W® Revised 4/11/2019 Bronze Ball Valves Two-Piece Body • Full Port • Bronze Trim • 3/4" Hose Connection with Cap • Blowout-Proof Stem 600 PSI/41.4 bar non-shock cold working pressuret CONFORMS TO MSS SP-110 PART MATERIAL LIST 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Packing 5. Thrust Washer 6. Stem 7. Ball 8. Seat Ring (2) 9. Body 10. Hose Body End 11. 1Cap 12. Gasket 13.
PAGE 16
AHEAD OF THE www.nibco.com F L O W® Revised 4/11/2019 Bronze Ball Valves Two-Piece Body • Full Port • Stainless Trim • 3/4" Hose Connection with Cap • Blowout-Proof Stem 600 PSI/41.4 bar non-shock cold working pressuret CONFORMS TO MSS SP-110 MATERIAL LIST PART T-585-70-66-HC SPECIFICATION 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Packing 5. Thrust Washer 6. Stem 7. Ball 8. Seat Ring (2) 9. Body 10. Hose Body End 11. 1Cap 12. Gasket 13.
PAGE 17
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves Two-Piece Body • Full Port • Bronze Trim • Single Union Ends • Blowout-Proof Stem 600 PSI/41.4 bar non-shock cold working pressure 150 PSI/10.3 saturated steam*t CONFORMS TO MSS SP-110 PART MATERIAL LIST 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Packing 5. Thrust Washer 6. Stem 7. Ball 8. Seat Ring (2) 9. O-Ring 10. Tail Piece 11. Union Nut 12. Body End 13.
PAGE 18
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves Two-Piece Body • Full Port • Stainless Steel Trim • Single Union Ends • Blowout-Proof Stem 600 PSI/41.4 bar non-shock cold working pressure 150 PSI/10.3 saturated steam*t CONFORMS TO MSS SP-110 PART MATERIAL LIST 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Packing 5. Thrust Washer 6. Stem 7. Ball 8. Seat Ring (2) 9. O-Ring 10. Tail Piece 11. Union Nut 12. Body End 13.
PAGE 19
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves Two-Piece Body • Full Port • Bronze Trim • Single Union Ends • Blowout-Proof Stem 600 PSI/41.4 bar non-shock cold working pressure 150 PSI/10.3 bar saturated steam*t CONFORMS TO MSS SP-110 PART MATERIAL LIST 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Packing 5. Thrust Washer 6. Stem 7. Ball 8. Seat Ring (2) 9. O-Ring 10. Tail Piece 11. Union Nut 12. Body End 13.
PAGE 20
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves Dezincification Resistant Two-Piece Body • 250 Steam Rating • Full Port • 316SS Trim • Carbon-Filled PTFE Seats • Blowout-Proof Stem • Vented Ball 600 PSI/41.4 bar non-shock cold working pressure 250 PSI/17.2 bar saturated steamt CONFORMS TO MSS SP-110 MATERIAL LIST PART 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Packing 5. Thrust Washer 6. Stem 7. Ball (Vented) 8. Seat Ring (2) 9. Body 10.
PAGE 21
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves Dezincification Resistant Two-Piece Body • Full Port 1/4"-1" • Conventional Port 11/4"-2" • Bronze Trim • Safety Vent® for Pneumatic Applications • Blowout-Proof Stem 600 PSI/41.4 bar non-shock cold working pressure O.S.H.A. 1910.147 MATERIAL LIST PART 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Packing 5. Stem 6. Thrust Washer 7. Ball 8. Seat Ring (2) 9. Body 10. Body End Piece 11.
PAGE 22
AHEAD OF THE www.nibco.com F L O W® Revised 6/11/2021 Bronze Ball Valves Dezincification Resistant Two-Piece Body • Full Port 1/4"-1" • Conventional Port 11/4"-3" • Bronze Trim • Blowout-Proof Stem • UL listed 250 PSI/17.2 Bar Non-Shock LP Gas per UL842 CONFORMS TO MSS SP-110 CSA CERTIFIED TO ANSI/ASME B 16.33 FOR NATURAL AND PROPANE GAS TO 125 PSIG (1/2"-1") MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Packing 5. Stem 6. Thrust Washer 7. Ball 8.
PAGE 23
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves Dezincification Resistant Two-Piece Body • Full Port • 316SS Trim • Blowout-Proof Stem • ISO Direct-Mount Pad for Actuation • Vented Ball 600 PSI/41.4 Bar Non-Shock Cold Working Pressure 150 PSI/10.3 Bar Saturated Steamt CONFORMS TO MSS SP-110 • ACTUATOR MOUNT PER ISO 5211 MATERIAL LIST PART 1. Stem 2. O-Ring (2) 3. Thrust Washer 4. Seat Ring (2) 5. Ball (Vented) 6. Body 7.
PAGE 24
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves Dezincification Resistant Three-Way Body • Full Port 1/2"-1" • Conventional Port 11/4"-2" • 3-Way Bronze Ball Valve • Bronze Trim • Blowout-Proof Stem 400 PSI/27.6 bar non-shock cold working pressure T-585-70-W3 Threaded CONFORMS TO MSS SP-110 MATERIAL LIST PART 1. Handle 2. Handle Nut 3. Threaded Pack Gland 4. Packing 5. Thrust Washer 6. Stem 7. Seat Ring (2) 8. Ball 9. Body 10.
PAGE 25
AHEAD OF THE www.nibco.com F L O W® Revised 12/10/2020 Bronze Ball Valves Dezincification Resistant Three-Way Body • Full Port 1/2"-1" • Conventional Port 11/4"-2" • 3-Way Bronze Ball Valve • 316SS Trim • Blowout-Proof Stem • Vented Ball T-585-70-66-W3 Threaded 400 PSI/27.6 bar non-shock cold working pressure CONFORMS TO MSS SP-110 S-585-70-66-W3 MATERIAL LIST PART 1. Handle 2. Handle Nut 3. Threaded Pack Gland 4. Packing 5. Thrust Washer 6. Stem 7. Seat Ring (2) 8. Ball (Vented) 9.
PAGE 26
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves Dezincification Resistant Three-Piece Body • Full Port 1/4"-1" • Conventional Port 11/4"-3" • Bronze Trim • Blowout-Proof Stem 600 PSI/41.4 bar non-shock cold working pressure 150 PSI/10.3 bar saturated steamt CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Stem 5. Body 6. Packing 7. Body End (2) 8. O-Ring Seal (2) 9. Seat Ring (2) 10. Ball 11.
PAGE 27
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves Three-Piece Body • Full Port 1/4"-1" • Conventional Port 11/4"-3" • 316SS Trim • Blowout-Proof Stem • Vented Ball 600 PSI/41.4 bar non-shock cold working pressure Dezincification 150 PSI/10.3 bar saturated steamt Resistant CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Stem 5. Body 6. Packing 7. Body End (2) 8. O-Ring Seal (2) 9. Seat Ring (2) 10.
PAGE 28
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves Dezincification Resistant Three-Piece Body • Full Port 1/4"-1" • Conventional Port 11/4"-3" • UL Listed for Flammable Liquids • Blowout-Proof Stem 175 PSI/12.1 bar non-shock LP gas per UL842 CONFORMS TO MSS SP-110 • UL842 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Stem 5. Body 6. Packing 7. Body End (2) 8. O-Ring Seal (2) 9. Seat Ring (2) 10. Ball 11. Thrust Washer 12.
PAGE 29
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves Dezincification Resistant Three-Piece Body • Conventional Port • Grooved Ends • Bronze Trim • Blowout-Proof Stem 600 PSI/41.4 bar non-shock cold working pressure CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Stem 5. Body 6. Packing 7. Body End (2) 8. O-Ring Seal (2) 9. Seat Ring (2) 10. Ball 11. Thrust Washer 12. Body Bolts 13.
PAGE 30
AHEAD OF THE F L O W® www.nibco.com Revised 7/19/2018 Bronze Ball Valves Dezincification Resistant Three-Piece Body • Conventional Port • Grooved Ends • 316SS Trim • Blowout-Proof Stem • Vented Ball 600 PSI/41.4 bar non-shock cold working pressure CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Stem 5. Body 6. Packing 7. Body End (2) 8. O-Ring Seal (2) 9. Seat Ring (2) 10. Ball (Vented) 11. Thrust Washer 12. Body Bolts 13.
PAGE 31
AHEAD OF THE www.nibco.com F L O W® Revised 7/26/2021 Bronze Ball Valves Dezincification Resistant Three-Piece Body • Full Port • Bronze Trim • Blowout-Proof Stem 600 PSI/41.4 bar non-shock cold working pressure 150 PSI/10.3 bar saturated steamt CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Stem 5. Body 6. Packing 7. Body End (2) 8. O-Ring Seal (2) 9. Seat Ring (2) 10. Ball 11. Thrust Washer 12. Body Bolts 13.
PAGE 32
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves Three-Piece Body • Full Port • Bronze Trim • 300 Series External Trim • Blowout-Proof Stem 600 PSI/41.4 bar non-shock cold working pressure 150 PSI/10.3 bar saturated steamt CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Stem 5. Body 6. Packing 7. Body End (2) 8. O-Ring Seal (2) 9. Seat Ring (2) 10. Ball 11. Thrust Washer 12. Body Bolts 13.
PAGE 33
AHEAD OF THE www.nibco.com F L O W® Revised 7/26/2021 Bronze Ball Valves Dezincification Resistant Three-Piece Body • Full Port • 316SS Trim • Blowout-Proof Stem • Vented Ball 600 PSI/41.4 bar non-shock cold working pressure 150 PSI/10.3 bar saturated steamt CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Stem 5. Body 6. Packing 7. Body End (2) 8. O-Ring Seal (2) 9. Seat Ring (2) 10. Ball (Vented) 11. Thrust Washer 12.
PAGE 34
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves Dezincification Resistant Three-Piece Body • Full Port • 316SS Internal Trim • 300 Series • External Trim • Blowout-Proof Stem • Vented Ball 600 PSI/41.4 bar non-shock cold working pressure 150 PSI/10.3 bar saturated steamt CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Stem 5. Body 6. Packing 7. Body End (2) 8. O-Ring Seal (2) 9. Seat Ring (2) 10.
PAGE 35
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves Dezincification Resistant Three-Piece Body • Full Port • Thread x Solder End Connections • Blowout-Proof Stem 600 PSI/41.4 bar non-shock cold working pressure 150 PSI/10.3 bar saturated steamt CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Stem 5. Packing 6. Thrust Washer 7. O-Ring Seal (2) 8. Seat Ring (2) 9. Ball 10. Solder Body End 11. Body 12.
PAGE 36
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves Dezincification Resistant Three-Piece Body • Full Port • Grooved End • Bronze Trim • Blowout-Proof Stem 600 PSI/41.4 bar non-shock cold working pressure CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Stem 5. Body 6. Packing 7. Body End (2) 8. O-Ring Seal (2) 9. Seat Ring (2) 10. Ball 11. Thrust Washer 12. Body Bolts 13.
PAGE 37
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves Dezincification Resistant Three-Piece Body • Full Port • Grooved End • 316SS Trim • Blowout-Proof Stem • Vented Ball 600 PSI/41.4 bar non-shock cold working pressure CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Stem 5. Body 6. Packing 7. Body End (2) 8. O-Ring Seal (2) 9. Seat Ring (2) 10. Ball (Vented) 11. Thrust Washer 12. Body Bolts 13.
PAGE 38
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves Dezincification Resistant Three-Piece Body • Full Port 1/4"-2" • UL Listed for Flammable Liquids and LP Gas • Blowout-Proof Stem 175 PSI/12.1 bar non-shock LP gas per UL842 CONFORMS TO MSS SP-110 • UL842 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Stem 5. Body 6. Packing 7. Body End (2) 8. O-Ring Seal (2) 9. Seat Ring (2) 10. Ball 11. Thrust Washer 12. Body Bolts 13.
PAGE 39
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves Three-Piece Body • Full Port • Copper Stub Ends • Type K (straight) • Type L (expanded) • Cleaned and Bagged for OX Service • Bronze Trim • Blowout-Proof Stem Dezincification Resistant 600 PSI/41.4 bar non-shock cold working pressure 200 PSI/13.8 bar for medical gas CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Stem 5. Body 6. Packing 7. Body End (2) 8.
PAGE 40
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves Three-Piece Body • Full Port • 6" Copper Stub Ends • Type K (straight) • Type L (expanded) • Cleaned and Bagged for OX Service • 316SS Trim • Blowout-Proof Dezincification Resistant 600 PSI/41.4 bar non-shock cold working pressure 200 PSI/13.8 bar for medical gas CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Handle 3. Threaded Pack Gland 4. Stem 5. Body 6. Packing 7. Body End (2) 8.
PAGE 41
AHEAD OF THE www.nibco.
PAGE 42
AHEAD OF THE www.nibco.
PAGE 43
AHEAD OF THE www.nibco.com F L O W® One, Two, and Three-Piece Carbon Steel Ball Valves Illustrated Index One-Piece Carbon Steel Ball Valve 2000 lb. CWP One-Piece Bar Stock Carbon Steel Ball Valve 2000 lb. CWP ½"-1" 1500 lb. CWP 1¼"-2" T-560-CS-R-25/66-LL Sizes ¼" thru 2" T-560-CS-R-25/66-FS-LL Sizes ½" thru 2" Threaded Ends Pages 45-48 T-570-CS-R-25/66 Sizes ½" thru 2" Threaded Ends Page 49, 50 Two-Piece Carbon Steel Ball Valve 2000 lb.
PAGE 44
AHEAD OF THE www.nibco.com F L O W® One, Two, and Three-Piece Carbon Steel Ball Valves Illustrated Index Two-Piece Bar Stock Carbon Steel Ball Valve 2000 lb. CWP ¼"-1" 1500 lb. CWP 1¼"-2" T-580-CS-R-25 Sizes 3⁄8" thru 2" T-580-CS-R-66 Sizes ¼" thru 2" Threaded Ends Page 55, 56 Three-Piece Carbon Steel Ball Valve 2000 lb. CWP TM/KM/BM-590-CS-R-66-FS-LL Sizes ½" thru 2" Threaded, Socket or Butt Weld Ends Page 57 Three-Piece Carbon Steel Ball Valve 1000 lb.
PAGE 45
AHEAD OF THE www.nibco.com F L O W® Revised 11/20/2017 Carbon Steel Ball Valves One-Piece Body • Reduced Port • Blowout-Proof Stem • CS Trim • Vented Ball 2000 PSI/138 bar non-shock cold working pressuret CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Body 2. Body Insert 3. Ball (Vented) 4. Stem 5. Seat 6. Thrust Washer 7. 1Stem Packing 8. Threaded Pack Gland 9. Handle Nut 10.
PAGE 46
AHEAD OF THE www.nibco.com F L O W® Revised 11/20/2017 Carbon Steel Ball Valves One-Piece Body • Reduced Port • Blowout-Proof Stem • CS Trim • Vented Ball • Fire Safe 2000 PSI/138 bar non-shock cold working pressuret CONFORMS TO API-607 FOURTH EDITION FIRE SAFE • MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Body 2. Body Insert 3. Ball (Vented) 4. Stem 5. Seat 6. Thrust Washer 7. 1Stem Packing 8. Threaded Pack Gland 9. Handle Nut 10.
PAGE 47
AHEAD OF THE www.nibco.com F L O W® Revised 11/20/2017 Carbon Steel Ball Valves One-Piece Body • Reduced Port • Blowout-Proof Stem • 316 SS Trim • Vented Ball 2000 PSI/138 bar non-shock cold working pressuret CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Body 2. Body Insert 3. Ball (Vented) 4. Stem 5. Seat 6. Thrust Washer 7. 1Stem Packing 8. Threaded Pack Gland 9. Handle Nut 10.
PAGE 48
AHEAD OF THE www.nibco.com F L O W® Revised 11/20/2017 Carbon Steel Ball Valves One-Piece Body • Reduced Port • Blowout-Proof Stem • 316 SS Trim • Vented Ball • Fire Safe 2000 PSI/138 bar non-shock cold working pressuret CONFORMS TO API-607 FOURTH EDITION FIRE SAFE MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Body 2. Body Insert 3. Ball (Vented) 4. Stem 5. Seat 6. Thrust Washer 7. 1Stem Packing 8. Threaded Pack Gland 9. Handle Nut 10.
PAGE 49
AHEAD OF THE www.nibco.com F L O W® Revised 10/1/2021 Carbon Steel Ball Valves One-Piece Bar Stock Body • Blowout-Proof Stem • CS Trim • Vented Ball 2000 PSI/138 bar non-shock cold working pressure (1/2"-1") 1500 PSI/103 bar non-shock cold working pressure (1¼"-2")t CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Handle 3. Packing Nut 4. Belleville Washer (2) 5. Pack Gland 6. Stem Packing 7. Thrust Washer 8. Stem 9. Ball (Vented) Chrome Plated 10. Seat Ring (2) 11.
PAGE 50
AHEAD OF THE www.nibco.com F L O W® Revised 11/20/2017 Carbon Steel Ball Valves One-Piece Bar Stock Body • Blowout-Proof Stem • 316 SS Trim • Vented Ball 2000 PSI/138 bar non-shock cold working pressure (1/2"-1") 1500 PSI/103 bar non-shock cold working pressure (1¼"-2")t CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Handle 3. Packing Nut 4. Belleville Washer (2) 5. Pack Gland 6. Stem Packing 7. Thrust Washer 8. Stem 9. Ball (Vented) 10. Seat Ring (2) 11.
PAGE 51
AHEAD OF THE www.nibco.com F L O W® Revised 11/20/2017 Carbon Steel Ball Valves Two-Piece Body • Conventional Port • Blowout-Proof Stem • CS Trim • Cast Mounting Pad • Vented Ball 2000 PSI/138 bar non-shock cold working pressuret CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Stem 3. Lock Washer 4. Threaded Pack Gland 5. Thrust Washer 6. Gasket 7. Body End Piece 8. Ball (Vented) 9. Seat (2) 10. Body 11. Stem Packing (2) 12.
PAGE 52
AHEAD OF THE www.nibco.com F L O W® Revised 11/20/2017 Carbon Steel Ball Valves Two-Piece Body • Conventional Port • Blowout-Proof Stem • 316 SS Trim • Cast Mounting Pad • Vented Ball 2000 PSI/138 Bar Non-Shock Cold Working Pressuret CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Stem 3. Lock Washer 4. Threaded Pack Gland 5. Thrust Washer 6. Gasket 7. Body End Piece 8. Ball (Vented) 9. Seat (2) 10. Body 11. Stem Packing (2) 12.
PAGE 53
AHEAD OF THE www.nibco.com F L O W® Revised 2/19/2020 Carbon Steel Ball Valves with Spring Return Handle Spring Return Handle to Close • Two-Piece Investment Cast Body • Conventional Port • Blowout-Proof Stem • CS Trim • Vented Ball 2000 PSI/138 bar non-shock cold working pressuret CONFORMS TO MSS SP-110 & NACE MR0175 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Stem 3. Lock Washer 4. Threaded Pack Gland 5. Thrust Washer 6. Gasket 7. Body End Piece 8. Ball (Vented) 9. Seats (2) 10.
PAGE 54
AHEAD OF THE www.nibco.com F L O W® Revised 2/19/2020 Carbon Steel Ball Valves with Spring Return Handle Spring Return Handle to Close • Two-Piece Investment Cast Body • Conventional Port • Blowout-Proof Stem • 316 SS Trim • Vented Ball 2000 PSI/138 Bar Non-Shock Cold Working Pressuret CONFORMS TO MSS SP-110 & NACE MR0175 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Stem 3. Lock Washer 4. Threaded Pack Gland 5. Thrust Washer 6. Gasket 7. Body End Piece 8. Ball (Vented) 9.
PAGE 55
AHEAD OF THE www.nibco.com F L O W® Revised 11/20/2017 Carbon Steel Ball Valves Two-Piece Bar Stock Body • Conventional Port • Blowout-Proof Stem • CS Trim • Vented Ball 2000 PSI/138 bar non-shock cold working pressure (3⁄8"-1") 1500 PSI/103 bar non-shock cold working pressure (1-1⁄4"-2")t CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Stem 3. Spring Washer 4. Belleville Washer (2) 5. Stem Packing (2) 6. Thrust Washer 7. Body End Piece 8. Spacer Seal 9.
PAGE 56
AHEAD OF THE www.nibco.com F L O W® Revised 11/20/2017 Carbon Steel Ball Valves Two-Piece Bar Stock Body • Conventional Port • Blowout-roof Stem • 316 SS Trim • Vented Ball 2000 PSI/138 bar non-shock cold working pressure (¼"-1") 1500 PSI/103 bar non-shock cold working pressure (1¼"-2")t CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Stem 3. Lock Washer 4. Belleville Washer (2) 5. Stem Packing (2) 6. Thrust Washer 7. Body End Piece 8. Spacer Seal 9. Ball (Vented) 10.
PAGE 57
AHEAD OF THE www.nibco.com F L O W® Revised 11/20/2017 Carbon Steel Ball Valves Three-Piece Body • Threaded, Butt or Socket Weld Ends • Blowout-Proof Stem • Conventional Port • Enclosed Bolt Design • PTFE Seats • SS Trim • Cast ISO Mounting Pad • Vented Ball • Fire Safe 2000 PSI/138 Bar Non-Shock Cold Working Pressuret CONFORMS TO API-607 FOURTH EDITION FIRE SAFE • MSS SP-110 • MSS SP-72 (BUTT WELD) • API 608 ANTI-STATIC FEATURE MATERIAL LIST PART SPECIFICATION 1. Stem 2. Handle Nut 3.
PAGE 58
AHEAD OF THE www.nibco.com F L O W® Revised 11/20/2017 Carbon Steel Ball Valves Three-Piece Body • Full Port • Blowout-Proof Stem • 316 SS Trim • Vented Ball 1000 PSI/69 bar non-shock cold working pressuret CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Stem 3. Lock Washer 4. Stem Packing (1 Set) 5. Thrust Washer 6. Cap Bolt (4) 7. Union Seal (2) 8. Ball (Vented) 9. Body 10. Seat (2) 11. Body End (2) 12. Lock Washer (4) 13. Threaded Pack Gland 14. Handle 15.
PAGE 59
AHEAD OF THE www.nibco.com F L O W® Revised 11/20/2017 Carbon Steel Ball Valves Three-Piece Body • Full Port • Cast ISO Mounting Pad • Blowout-Proof Stem • 316 SS Trim • Vented Ball 1000 PSI/69 bar non-shock cold working pressuret CONFORMS TO MSS SP-110 MATERIAL LIST PART 1. Stop Pin 2. Stop Plate 3. Stem 4. Handle Nut 5. Stem Packing (1 Set) 6. Thrust Washer 7. Cap Bolt (4) 8. Body Ends (2) 9. Seat (2) 10. Body 11. Ball (Vented) 12. Union Seal (2) 13. Cap Nut (4) 14. Threaded Pack Gland 15.
PAGE 60
AHEAD OF THE www.nibco.
PAGE 61
AHEAD OF THE www.nibco.com F L O W® Revised 11/20/2017 One, Two, and Three-Piece Stainless Steel Ball Valves Illustrated Index One-Piece Stainless Steel Ball Valve 2000 lb. CWP Two-Piece Stainless Steel Ball Valve 2000 lb. CWP Spring Return Handle Two-Piece Stainless Steel Ball Valve 2000 lb.
PAGE 62
AHEAD OF THE www.nibco.com F L O W® Revised 11/20/2017 Stainless Steel Ball Valves One-Piece Body • Reduced Port • Blowout-Proof Stem • 316 SS Trim • Vented Ball 2000 PSI/138 Bar Non-Shock Cold Working Pressuret CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Body 2. Body Insert 3. Ball (Vented) 4. Stem 5. Seat 6. Thrust Washer 7. 1Stem Packing 8. Threaded Pack Gland 9. Handle Nut 10.
PAGE 63
AHEAD OF THE www.nibco.com F L O W® Revised 11/20/2017 Stainless Steel Ball Valves One-Piece Body • Reduced Port • Blowout-Proof Stem • 316 SS Trim • Vented Ball • Fire Safe 2000 PSI/138 bar non-shock cold working pressuret CONFORMS TO API-607 FIFTH EDITION FIRE SAFE MSS SP-110 PART MATERIAL LIST SPECIFICATION 1. Body 2. Body Insert 3. Ball (Vented) 4. Stem 5. Seat 6. Thrust Washer 7. 1Stem Packing 8. Threaded Pack Gland 9. Handle Nut 10.
PAGE 64
AHEAD OF THE www.nibco.com F L O W® Revised 11/20/2017 Stainless Steel Ball Valves Two-Piece Body • Conventional Port • Blowout-Proof Stem • 316 SS Trim • Cast Mounting Pad • Vented Ball 2000 PSI/138 bar non-shock cold working pressuret CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Stem 3. Lock Washer 4. Threaded Pack Gland 5. Thrust Washer 6. Gasket 7. Body End Piece 8. Ball (Vented) 9. Seat (2) 10. Body 11. Stem Packing (2) 12.
PAGE 65
AHEAD OF THE www.nibco.com F L O W® Revised 2/19/2020 Stainless Steel Ball Valves with Spring Return Handle Spring Return Handle to Close • Two-Piece Body • Conventional Port • Blowout-Proof Stem • 316 SS Trim • Vented Ball 2000 PSI/138 bar non-shock cold working pressuret CONFORMS TO MSS SP-110 & NACE MR0175 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Stem 3. Lock Washer 4. Threaded Pack Gland 5. Thrust Washer 6. Gasket 7. Body End Piece 8. Ball (Vented) 9. Seats (2) 10. Body 11.
PAGE 66
AHEAD OF THE www.nibco.com F L O W® Revised 11/20/2017 Stainless Steel Ball Valves Two-Piece Body • Full Port • Blowout-Proof Stem • 316 SS Trim • Cast Mounting Pad • Vented Ball 1000 PSI/69 bar non-shock cold working pressuret CONFORMS TO MSS SP-110 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Stem 3. Spring Washer 4. Threaded Pack Gland 5. Thrust Washer 6. Gasket 7. Body End Piece 8. Ball (Vented) 9. Seat (2) 10. Body 11. Stem Packing (2) 12.
PAGE 67
AHEAD OF THE www.nibco.com F L O W® Revised 2/19/2020 Stainless Steel Ball Valves with Spring Return Handle Spring Return Handle to Close • Two-Piece Investment Cast Body • Full Port • Blowout-Proof Stem • 316 SS Trim • Vented Ball 1000 PSI/69 bar non-shock cold working pressuret CONFORMS TO MSS SP-110 & NACE MR0175 MATERIAL LIST PART SPECIFICATION 1. Handle Nut 2. Stem 3. Lock Washer 4. Threaded Pack Gland 5. Thrust Washer 6. Gasket 7. Body End Piece 8. Ball (Vented) 9. Seats (2) 10.
PAGE 68
AHEAD OF THE www.nibco.com F L O W® Revised 11/20/2017 Stainless Steel Ball Valves Three-Piece Body • Threaded, Butt or Socket Weld Ends • Blowout-Proof Stem • Conventional Port • Enclosed Bolt Design • PTFE Seats • SS Trim • Cast ISO Mounting Pad • Vented Ball • Fire Safe 2000 PSI/138 bar non-shock cold working pressuret CONFORMS TO API-607 FOURTH EDITION FIRE SAFE • MSS SP-110 • MSS SP-72 (BUTT WELD) • API 608 ANTI-STATIC FEATURE MATERIAL LIST PART SPECIFICATION 1. Stem 2. Handle Nut 3.
PAGE 69
AHEAD OF THE www.nibco.com F L O W® Revised 11/20/2017 Stainless Steel Ball Valves Three-Piece Body • Full Port • Blowout-Proof Stem • Full Port • 316 SS Trim • Vented Ball 1000 PSI/69 bar non-shock cold working pressuret CONFORMS TO MSS SP-110 PART MATERIAL LIST SPECIFICATION 1. Handle Nut 2. Stem 3. Lock Washer 4. Stem Packing (1 Set) 5. Thrust Washer 6. Cap Bolt (4) 7. Union Seal (2) 8. Ball (Vented) 9. Body 10. Seat (2) 11. 1 Body End (2) 12. Lock Washer (4) 13. Threaded Pack Gland 14.
PAGE 70
AHEAD OF THE www.nibco.com F L O W® Revised 11/20/2017 Stainless Steel Ball Valves Three-Piece Body • Full Port • Cast ISO Mounting Pad • Blowout-Proof Stem • 316 SS Trim • Vented Ball 1000 PSI/69 bar non-shock cold working pressuret CONFORMS TO MSS SP-110 TM-595-S6-R-66 Threaded ISO Mount MATERIAL LIST PART 1. Stop Pin 2. Stop Plate 3. Stem 4. Handle Nut 5. Stem Packing (1 Set) 6. Thrust Washer 7. Cap Bolt 8. 1 Body End (2) 9. Seat (2) 10. Body 11. Ball (Vented) 12. Union Seal (2) 13.
PAGE 71
AHEAD OF THE www.nibco.com F L O W® Revised 11/20/2017 Pressure Temperature Ratings Carbon and Stainless Steel Ball Valves • Threaded and Socket Weld Ends • One-Piece Carbon/Stainless (Cast) (Bar Stock) T-570-CS 1/2"-1" T-570-CS 1 1/2"-2" Shaded area refers to recommended seat rating. Chemical Compatibility Please consult the most current edition of the NIBCO Chem-Guide for recommendations regarding chemical compatibility of material exposure to specific media and media-treatment additives.
PAGE 72
AHEAD OF THE F L O W® www.nibco.com Revised 11/20/2017 Pressure/Temperature Ratings Carbon and Stainless Steel Ball Valves • Threaded, Socket, and Butt Weld Ends • Two and Three-Piece Carbon/Stainless T-580-CS and S6 1/2"-1" T-580-CS and S6 1 ¼-2" Shaded area refers to recommended seat rating. Chemical Compatibility Please consult the most current edition of the NIBCO Chem-Guide for recommendations regarding chemical compatibility of material exposure to specific media and media-treatment additives.
PAGE 73
AHEAD OF THE www.nibco.
PAGE 74
AHEAD OF THE www.nibco.
PAGE 75
AHEAD OF THE www.nibco.com F L O W® Revised 11/20/2017 Flanged Ball Valves The positive solution for all your flow control applications. NIBCO® flanged ball valves provide precision, performance and value for industrial flow control applications. The unibody and split-body valves are designed and manufactured to meet or exceed ANSI, MSS and API specifications.
PAGE 76
AHEAD OF THE www.nibco.com F L O W® Revised 11/20/2017 Flanged Ball Valves The positive solution for all your flow control applications. Split-Body Full-Bore Flanged Ball Valves • Split-body design allows greater serviceability – disassembles easily for repair or replacement of internal components. • Full-bore design provides exceptional flow control. • Increased packing depth allows adequate packing to prevent leakage around the stem.
PAGE 77
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Class 150 Carbon Steel Flanged Ball Valves Unibody Design • Blowout-Proof Stem • 316 SS Trim • Mounting Pad • Fire Safe • Vented Ball 285 PSI/19.7 bar non-shock cold working pressuret CONFORMS TO ASME/ANSI B16.34, B16.5, MSS SP 72, API 607 FOURTH EDITION, API 608, API 598, MSS SP 25 MATERIAL LIST PART 1. 1Body and End Piece 2. 1Ball (Vented) 3. Stem 4. Seat 5. Packing Set 6. Pack Gland 7. Pack Gland Nut 8. O-Ring 9.
PAGE 78
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Class 300 Carbon Steel Flanged Ball Valves Unibody Design • Blowout-Proof Stem • 316 SS Trim • Mounting Pad • Fire Safe • Vented Ball 740 PSI/51 bar non-shock cold working pressuret CONFORMS TO ASME/ANSI B16.34, B16.5, MSS SP 72, API 607 FOURTH EDITION, API 608, API 598, MSS SP 25 MATERIAL LIST PART 1. 1Body and End Piece 2. 1Ball (Vented) 3. Stem 4. Seat 5. Packing Set 6. Pack Gland 7. Pack Gland Nut 8. O-Ring 9.
PAGE 79
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Class 150 Carbon Steel Flanged Ball Valves Split-Body, Full-Bore Design • Blowout-Proof Stem • 316 SS Trim • Mounting Pad • Fire Safe • Vented Ball 285 PSI/19.7 bar non-shock cold working pressuret CONFORMS TO ASME/ANSI B16.34, B16.5, MSS SP 72, API 607 FOURTH EDITION, API 608, API 598, MSS SP 25 MATERIAL LIST PART 1 SPECIFICATION 1. 1Body and End Piece 2. 1Ball (Vented) 3. Stem 4. Seat 5. Packing Set 6. Pack Gland 7. Gasket 8.
PAGE 80
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Class 300 Carbon Steel Flanged Ball Valves Split-Body, Full-Bore Design • Blowout-Proof Stem • 316 SS Trim • Mounting Pad • Fire Safe • Vented Ball 740 PSI/51 bar non-shock cold working pressuret CONFORMS TO ASME/ANSI B16.34, B16.5, MSS SP 72, API 607 FOURTH EDITION, API 608 API 598, MSS SP 25 MATERIAL LIST PART 1. 1Body and End Piece 2. 1Ball (Vented) 3. Stem 4. Seat 5. Packing Set 6. Pack Gland 7. Gasket 8. Body Stud 9.
PAGE 81
AHEAD OF THE www.nibco.
PAGE 82
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Class 150 Stainless Steel Flanged Ball Valves Unibody Design • Blowout-Proof Stem • 316 SS Trim • Mounting Pad • Fire Safe • Vented Ball 275 PSI/19 bar non-shock cold working pressuret CONFORMS TO ASME/ANSI B16.34, B16.5, MSS SP 72, API 607 FOURTH EDITION, API 608, API 598, MSS SP 25 MATERIAL LIST PART 1. 1Body and End Piece 2. 1Ball (Vented) 3. Stem 4. Seat 5. Packing Set 6. Pack Gland 7. Pack Gland Nut 8. O-Ring 9.
PAGE 83
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Class 300 Stainless Steel Flanged Ball Valves Unibody Design • Blowout-Proof Stem • 316 SS Trim • Mounting Pad • Fire Safe • Vented Ball 720 PSI/50 bar non-shock cold working pressuret CONFORMS TO ASME/ANSI B16.34, B16.5, MSS SP 72, API 607 FOURTH EDITION, API 608, API 598, MSS SP 25 MATERIAL LIST PART 1. 1Body and End Piece 2. 1Ball (Vented) 3. Stem 4. Seat 5. Packing Set 6. Pack Gland 7. Pack Gland Nut 8. O-Ring 9.
PAGE 84
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Class 150 Stainless Steel Flanged Ball Valves Split-Body, Full-Bore Design • Blowout-Proof Stem • 316 SS Trim • Mounting Pad • Fire Safe • Vented Ball 275 PSI/19 bar non-shock cold working pressuret CONFORMS TO ASME/ANSI B16.34, B16.5, MSS SP 72, API 607 FOURTH EDITION, API 608, API 598, MSS SP 25 MATERIAL LIST PART SPECIFICATION 1. Body and End Piece 2. 1Ball (Vented) 3. Stem 4. Seat 5. Packing Set 6. Pack Gland 7. Gasket 8. Body Stud 9.
PAGE 85
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Class 300 Stainless Steel Flanged Ball Valves Split-Body, Full-Bore Design • Blowout-Proof Stem • 316 SS Trim • Mounting Pad • Fire Safe • Vented Ball 720 PSI/50 bar non-shock cold working pressuret CONFORMS TO ASME/ANSI B16.34, B16.5, MSS SP 72, API 607 FOURTH EDITION, API 608, API 598, MSS SP 25 MATERIAL LIST PART SPECIFICATION 1. Body and End Piece 2. 1Ball (Vented) 3. Stem 4. Seat 5. Packing Set 6. Pack Gland 7. Gasket 8. Body Stud 9.
PAGE 86
AHEAD OF THE F L O W® www.nibco.com Revised 11/20/2017 Pressure Temperature Ratings for NIBCO® Flanged Ball Valve Seat Materials Shaded area refers to recommended seat rating. Chemical Compatibility Please consult the most current edition of the NIBCO Chem-Guide for recommendations regarding chemical compatibility of material exposure to specific media and media-treatment additives.
PAGE 87
AHEAD OF THE www.nibco.com F L O W® Bronze, Carbon and Stainless Steel Ball Valves Options and Accessories Index Bronze Threaded, Solder and Grooved Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88-90 Handle Options and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 88
AHEAD OF THE www.nibco.com F L O W® Revised 10/1/2021 Bronze Threaded, Solder, Press and Grooved Ball Valves Handle Options and Accessories A wide variety of handles are available to fulfill safety and operation requirements in various processing and manufacturing industries. The lever handle with plastic cover is standard. Other handle options are shown. Stainless steel lever handles are available, as an option, also with plastic covers.
PAGE 89
AHEAD OF THE www.nibco.com F L O W® Bronze Threaded, Solder, NIBCO® Press System and Grooved Ball Valves NIB-SEAL® Technical Data NIBCO bronze ball valves installed with NIB-SEAL® insulated handles are the only approach that keeps your insulated piping system completely intact. The revolutionary NIB-SEAL insulated handle system used with a NIBCO bronze ball valve, stops condensate, cold.
PAGE 90
AHEAD OF THE www.nibco.com F L O W® NIB-SEAL® Locking Handle U.S. PATENT 9,810,344 The patented technology of the 3-in-1 NIB-SEAL locking handle solves three problems at once: it extends, it insulates, and it locks. The innovative locking handle design extends valve actuation to provide ample room for insulating around piping systems, and its unique thermal barrier system prevents heat transfer and condensate development.
PAGE 91
AHEAD OF THE F L O W® www.nibco.com Bronze Threaded, Solder and Grooved Ball Valves Options and Accessories (continued) Stainless Steel Ball and Stem 316 stainless steel ball and stem are available on many NIBCO® ball valves – see catalog specification sheets to identify what valves are available or consult factory. Static Grounding NIBCO provides static grounding standard on most carbon, stainless steel and bronze three-piece ball valves. See product pages for availability.
PAGE 92
AHEAD OF THE www.nibco.com F L O W® Carbon and Stainless Steel Threaded, Socket and Butt Weld Ball Valves Options and Accessories CS Standard Lever Hdle. CS Locking Lever Hdle. SS Oval Hdle. SS Standard Lever Hdle. SS Locking Oval Hdle. Handle Options A wide variety of handles are available to fulfill safety and operations requirements in various processing and manufacturing industries. All handles come standard with plastic covers.
PAGE 93
AHEAD OF THE www.nibco.com F L O W® Carbon and Stainless Steel Flanged Ball Valves Options and Accessories Gear Operator Handle Options A wide variety of handles are available to fulfill safety and operations requirements in various processing and manufacturing industries. All handles come standard with plastic covers. All carbon steel body ball valves come with carbon steel lever handles. All stainless steel body ball valves come with stainless steel lever handles.
PAGE 94
AHEAD OF www.nibco.com F L O W® THE Ball Valve Options Quick Reference Std. = Standard • = Factory Installed * = Field Retrofit Option 1 = Not all sizes available, consult factory. 2 = Available on certain models, consult factory. 3 = Specify TM, KM or BM Bronze 560 -BR 580-70 585-70 Carbon Steel 590-Y 595-Y Stainless Steel Flanged 560 580 TC 590 595 560 580 585 590 595 -CS 570 -CS -580 -CS -CS -S6 -S6 -S6 -S6 -S6 510 515 530 535 End-Type Threaded Std. Std. Std. Std. Std.
PAGE 95
AHEAD OF THE www.nibco.com F L O W® Revision 3/31/2016 Ball Valve Seat Materials Virgin PTFE Virgin PTFE is a good all-around, general purpose seating material. PTFE has outstanding resistance to chemical attack by a broad spectrum of organic chemicals, inorganic chemicals and solvents and is generally considered chemically inert. PTFE is a self-lubricating polymer with a very low coefficient of friction, which makes an excellent seating material for quarter-turn ball valves.
PAGE 96
AHEAD OF THE www.nibco.com F L O W® Revision 3/31/2016 Ball Valve Seat Materials 25% Reinforced PTFE NIBCO uses short strand fiberglass as a reinforcement for our higher pressure carbon steel and alloy ball valve products. Adding reinforcement increases the pressure containing capabilities of PTFE by reducing its tendency to cold-flow. Color Code 25% reinforced PTFE resin has a color code of RED. This pigment is permanently molded into the PTFE resin matrix.
PAGE 97
AHEAD OF THE www.nibco.com F L O W® System Control Products Index Ball Valve Actuation and Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Ball Valve Actuation Data Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 98
AHEAD OF THE F L O W® www.nibco.com Ball Valve Actuation and Control Flexible, Reliable Actuation Engineered with a modular approach, NIBCO® electric and pneumatic actuation systems give you the flexibility to actuate new valves or to retrofit existing valves with unprecedented ease. Both electric and pneumatic actuation systems feature an ISO standard mounting design, assuring long-term industry acceptance.
PAGE 99
AHEAD OF www.nibco.com F L O W® THE Ball and/or Butterfly Valve Actuation Data Sheet To actuate all valves it is necessary to provide certain data to assure proper sizing and prevent damage to the system. Please supply as much data as possible. NIBCO recommends having the valve and actuators assembled and tested at the factory, rather than assembled in the field. Please indicate whether this inquiry is for an assembled and tested package or field assembly: Assemble and test Field assembly I.
PAGE 100
AHEAD OF THE F L O W® www.nibco.com Revised 7/19/2018 Bronze Ball Valves for System Controls Applications Two-Piece Body • Full Port • 316SS Trim • Blowout-Proof Stem • Pre-Assembled with NIBCO Series 2000 Thermoplastic Housed Pneumatic Actuator 600 PSI/41.4 bar non-shock cold working pressure CONFORMS TO MSS SP-110, ACTUATOR MOUNT PER ISO 5211 MATERIAL LIST PART 1. Stem 2. O-Ring 3. Thrust Washer 4. Seat Ring (2) 5. Ball (Vented) 6. Body 7. Body End Piece 8.
PAGE 101
AHEAD OF THE www.nibco.com F L O W® Revised 7/19/2018 Bronze Ball Valves for System Controls Applications Two-Piece Body • Reduced Port • 316SS Trim • Blowout-Proof Stem • Reduced Orifice Ball for HVAC Control Applications 600 PSI/41.4 bar non-shock cold working pressure CONFORMS TO MSS SP-110, ACTUATOR MOUNT PER ISO 5211 MATERIAL LIST PART 1. Stem 2. O-Ring (2) 3. Thrust Washer 4. Seat Ring (2) 5. Ball 6. Body 7.
PAGE 102
AHEAD OF THE www.nibco.
PAGE 103
AHEAD OF THE www.nibco.
PAGE 104
AHEAD OF THE www.nibco.com F L O W® Three-Way Bronze Ball Valves Data for Actuation NIBCO® T-585-W3 Series T-585-W3 3-Way Ball Valve Dimensions +.0 +0 Size A B C D F H ±.030 -.003 -.002 In. mm. In. mm. In. mm. In. mm. Tap Thru In. mm. In. mm. In. mm. 1/2 15 1.38 35 .69 17 .88 22 #10-24 .31 8 .22 6 .81 21 3/4 20 1.38 35 .69 17 .88 22 #10-24 .38 10 .25 6 .95 24 1 25 1.38 35 .69 17 .88 22 #10-24 .38 10 .25 6 .93 24 1 1/4 32 1.50 38 .75 19 .94 24 .
PAGE 105
AHEAD OF THE www.nibco.com F L O W® Two-Piece SS/CS Ball Valves Data for Actuation NIBCO® T-580-S6-R and TC-580-CS-R Series T-580-S6-R and TC-580-CS-R Dimensions Flat +.02 +.02 + 0/-.012 +0/-.012 +0/-.012 Size A B C D E F G H Flats Length Stem Ø Boss Ø In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Thr‘d 1/2 15 1.13 29 .56 14 .50 13 .55 14 .
PAGE 106
AHEAD OF THE www.nibco.com F L O W® Three-Piece Bronze Ball Valves Data for Actuation NIBCO® T/S-590 and TS-595 Series T/S-590 Series +0 Dimensions ± 03 + .03 -.002 Size A B C D E F In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. 1 1/4 32 .25 6 .38 10 1.09 28 .38 10 2.32 59 2.00 51 1 1/2 38 .38 10 .56 14 1.59 40 .50 13 2.63 67 2.62 66 2 50 .38 10 .56 14 1.62 41 .50 13 3.12 79 2.81 71 2 1/2 63 .38 10 .56 14 1.56 40 .56 14 3.88 99 3.
PAGE 107
AHEAD OF THE www.nibco.com F L O W® Three-Piece CS/SS Ball Valves Data for Actuation NIBCO® TM/KM/BM-590 and TM/KM-595 Series TM/KM/BM-590 Series Dimensions Size J M N E H BC In. mm. In. mm. In. mm. In. mm. In. mm. Thr'd In. mm. 1/2 .20 50 .41 10 .51 13 1.20 30 M5 1.42 36 3/4 .20 5 .41 10 .51 13 1.36 35 M5 1.42 36 1 .28 7 .60 15 .75 19 1.59 40 M5 1.65 42 1 1/4 32 .32 8 .63 16 .87 22 1.81 46 M5 1.65 42 1 1/2 40 .39 10 .69 18 .97 25 1.95 50 M6 1.
PAGE 108
AHEAD OF THE F L O W® www.nibco.com Engineering Data Index Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Temperature Limits of Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 109
AHEAD OF THE www.nibco.
PAGE 110
AHEAD OF THE www.nibco.com F L O W® Revised 10/1/2021 Flow Data Cv Values for Valves Valve Size Size (mm.) 4 8 10 15 20 25 32 40 50 65 80 90 100 125 150 200 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 S/T-29 0.5 2 4.9 9.1 22 40 65 95 175 S/T-111, 113, 131, 133 134, 136, 154, 174, 176 — 5.6 10.7 17.6 32 54 97 135 230 337 536 710 960 1,525 2,250 215 335 510 710 945 1,525 2,250 4,150 48 70 111 — 198 860 Size (In.
PAGE 111
AHEAD OF www.nibco.com F L O W® THE Revised 10/1/2021 Throttling Factors 250 300 350 400 450 500 600 750 900 For throttling use with disc partially open. Multiply Cv by factor. NOTE: gate valves are not throttled. 10 12 14 16 18 20 24 30 36 0 10 20 30 40 50 60 70 80 90 100 6,700 9,925 13,800 18,375 23,600 29,600 43,570 0 0.35 0.65 0.90 0.93 0.96 0.98 0.99 1.00 1.00 1.00 0 0.030 0.035 0.06 0.10 0.16 0.24 0.32 0.47 0.68 1.00 0 0.35 0.90 0.
PAGE 112
AHEAD OF THE www.nibco.com F L O W® Brass Type Properties of Valve Materials NOMINAL OR MAXIMUM CHEMICAL COMPOSITION ASTM ALLOY NO. OTHER MANGA- MOLYBALLOY CARBON CHROME COBALT COPPER IRON LEAD NESE DENUM DESIGNATION AL C Cr Co Cu Fe Pb Mn Mo Brass Wire (Red Brass) B 134 UNS C23000 85.0 .05 .05 Leaded Red Brass B 140 UNS C31400 89.0 .10 1.9 Free Cutting Brass B 16 UNS C36000 61.5 3.0 Forging Brass B 124 UNS C37700 60.0 .3 2.
PAGE 113
AHEAD OF THE www.nibco.com F L O W® NOMINAL OR MAXIMUM CHEMICAL COMPOSITION NICKEL PHOS SILICON SULFUR TIN Ni P Si S Sn TITANIUM Ti NOMINAL PHYSICAL PROPERTIES TUNG- STEN ZINC W Zn 15.0 TENSILE STRENGTH Psi YIELD STRENGTH Psi % ELONGATION 56,000 HARDNESS 60 HRB .7 9.1 50,000 30,000 7 60 HRB 35.5 50,000 20,000 15 75 HRB 38.0 52,000 20,000 45 80 HRB 38.0 52,000 20,000 45 78 HRB 29,000 13,000 18 55 HB .02 .005 .
PAGE 114
AHEAD OF THE www.nibco.com F L O W® Properties of Valve Materials Monel H.F. Trim Steels Steels Stainless Steel NOMINAL OR MAXIMUM CHEMICAL COMPOSITION ASTM ALLOY NO. OTHER MANGA- MOLYBALLOY CARBON CHROME COBALT COPPER IRON LEAD NESE DENUM DESIGNATION AL C Cr Co Cu Fe Pb Mn Mo Wrot 304 Cast 316 A 167 304 A 351 CF8M UNS S30400 UNS S31600 .08 .08 19 20 2 1.5 2.5 Cast 316 Cast 316 A 743 CF16F A 743 CF8M .16 .08 20 20 1.5 1.5 1.5 2.
PAGE 115
AHEAD OF THE www.nibco.com F L O W® NOMINAL OR MAXIMUM CHEMICAL COMPOSITION NICKEL PHOS SILICON SULFUR TIN Ni P Si S Sn TITANIUM Ti TUNG- STEN ZINC W Zn NOMINAL PHYSICAL PROPERTIES TENSILE STRENGTH Psi YIELD STRENGTH Psi % ELONGATION 9 11 .045 .04 1.0 2.0 .03 .04 75,000 70,000 30,000 30,000 40 25 11 12 .04 .045 2.0 1.0 .04 .03 70,000 75,000 30,000 30,000 30 30 12 1 .045 .04 1.0 1.5 .03 .04 75,000 90,000 30,000 65,000 30 18 .5 .04 .
PAGE 116
AHEAD OF THE F L O W® www.nibco.com Revised 3/31/2016 Valve Installation Tips SOLDERING AND SILVER BRAZING † Analyze the application to determine which valve is best suited for installations, keeping in mind the service for which the valve is recommended. Before installing the correct valve, review the installation instructions to prevent damage to the valve and to assure its maximum efficiency. 1. Cut tube end square. Ream, burr and size. 2.
PAGE 117
AHEAD OF THE www.nibco.com F L O W® ® NIBCO Pressure Rated Metal Valves Limited Warranty NIBCO INC. 125% LIMITED WARRANTY Applicable to NIBCO Pressure Rated Metal Valves NIBCO INC.
PAGE 118
AHEAD OF THE www.nibco.com F L O W® how to order State quantity, figure number and size for each valve you wish to order. See individual valve catalog pages for specific or special product designations. HOW MANY TO ORDER NIBCO valves are decimal packed for your convenience in handling, shipping and stock-keeping. Number in master carton varies with item. POLICY ON RETURNS TO FACTORY NO NIBCO valves are to be returned without prior written agreement. Transportation must be prepaid.
PAGE 119
globally connecting you at all levels It’s a new age of business, and a new way at NIBCO. From Elkhart, Indiana to Lodz, Poland, and points beyond, our company has integrated manufacturing, distribution, and networked communications to provide a seamless source of information and service, 24 hours a day, 7 days a week. But this integration hasn’t happened overnight. It’s been part of a longterm strategic process that has pushed us to reconsider every aspect World Headquarters of our business.
PAGE 120
C-BV-1121 VALVES Pressure-rated bronze, iron and alloy-iron gate, globe and check valves • Pressurerated bronze ball valves • Boiler specialty valves • Commercial and industrial butterfly valves • Lined butterfly valves • Circuit balancing valves and kits • Carbon and stainless steel ball valves • ANSI flanged steel ball valves • Lined ball valves • Pneumatic and electric actuators and controls • Grooved ball and butterfly valves • High performance butterfly valves • UL/FM fire protection valves • MSS spe