Buying Guide

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
20
AHEAD OF THE FLOW
®
www.nibco.com
1. Handle Cap ABS
2. Screw Zinc Plated Steel
3. Handle ABS
4. O-Ring EPDM
5. Seat Seal PTFE, EPDM
6. Ball PVC
7. Body PVC
MATERIAL LIST
PART SPECIFICATION
PVC Ball Valves
One-Piece Molded PVC Body • Threaded or Socket Ends
150 PSI/10.3 Bar Non-Shock Cold Working Pressure to 73° F/23° C
NSF Listed to NSF/ANSI 14
4660-S
Socket Weld
4660-S
Socket x Socket
DIMENSIONS—WEIGHTS
Dimensions
Size A B C D E 4660-S 4660-T
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Lbs. Kg.
¹⁄₂ 15 3.27 83 1.69 42 2.76 70 1.52 39 0.55 14 0.17 0.08 0.18 0.08
C⁄v 20 3.74 95 2.13 54 3.46 88 1.74 44 0.79 20 0.30 0.14 0.32 0.14
1 25 4.17 106 2.56 65 3.94 100 1.92 49 0.98 25 0.47 0.21 0.51 0.23
1¹⁄v 32 4.49 114 2.64 67 3.94 100 1.99 50 1.18 30 0.58 0.26 0.63 0.29
1¹⁄₂ 40 5.12 130 3.07 78 4.29 109 2.37 61 1.42 36 0.91 0.41 0.97 0.44
2 50 5.79 147 3.50 89 5.28 134 2.79 71 1.83 46 1.50 0.68 1.60 0.73
2¹⁄₂ 65 8.03 204 4.13 105 7.01 178 4.53 115 2.36 60 2.78 1.26 2.93 1.33
3 80 9.01 229 4.88 124 8.82 224 5.27 134 3.03 77 4.05 1.84 4.33 1.97
4 100 11.81 300 5.83 148 10.87 276 7.31 197 3.98 101 8.18 3.92 8.44 3.84
Note: Socket ends per ASTM D 2466
Thread ends per ANSI B1.20.1
4660-T
Threaded x Threaded
4660-T
Threaded
(not shown)
*
DO NOT USE OR TEST THE PLASTIC VALVES LISTED IN THIS CATALOG WITH COMPRESSED AIR OR OTHER GASSES.
WARNING: This product can expose you to chemicals including styrene, which is known to the State of California to cause cancer.
For more information go to www.P65Warnings.ca.gov.