Buying Guide
76
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
Visit www.nibco.com for current Chem-Guide and galvanic potential in piping systems information.
www.nibco.com
AHEAD OF THE FLOW
®
Revised 4/21/2020
MATERIAL LIST
PART SPECIFICATION
1. Handwheel Nut Ductile Iron ASTM A536
2. Identification Tag Aluminum
3. Handwheel Fabricated Steel
4. Yoke Bushing Ductile Iron ASTM A536
5. Split Yoke Bolt Steel ASTM A307/SAE J429
6. Split Yoke Bolt Nut Steel ASTM A563
7. Yoke ASTM A126 3% Nickel Iron Class B
8. Gland Follower Nut Steel ASTM A307/SAE J429
9. Gland Follower Ductile Iron ASTM A536
10. Yoke Bolt Steel ASTM A307/SAE J429
11. Yoke Bolt Nut Steel ASTM A563
12. Gland Follower Bolt Steel ASTM A307/SAE J429
13. Packing Gland ASTM A276 S31600SS
14. Packing
Wire Reinforced Carbon Yarn with
Resilient Core and Zinc Finish
15. Backseat Bushing ASTM A351 CF8M
16. Bonnet ASTM A126 3% Nickel Iron Class B
17. Stem ASTM A276 S31600SS
18. Body Bolt Steel ASTM A307/SAE J429
19. Body Bolt Nut Steel ASTM A563
20. Body Gasket Synthetic Fibers / Nitrile
21. Body ASTM A126 3% Nickel Iron Class B
22. Wedge ASTM A126 3% Nickel Iron Class B
23. Seat Ring ASTM A351 CF8M
24. Wedge Ring ASTM A351 CF8M
25. Swing Nut Steel ASTM A563
26. Swing Bolt Steel ASTM A307/SAE J429
27. Grease Fitting Alemite 1743B (not shown)
28. Stem Collar ASTM A276 S31600SS (not shown)
29. Wedge Pin ASTM A276 S31600SS (not shown)
30. Wedge Nut Ductile Iron ASTM A536 (not shown)
Class 125 3% Nickel Iron Body Gate Valves
Bolted Bonnet • Outside Screw and Yoke • Solid Wedge • Stainless Steel Trim
CONFORMS TO MSS SP-70
F-617-13
Flanged
F-617-13
Flg x Flg
DIMENSIONS—WEIGHTS—QUANTITIES
Dimensions
Size A B C D E Weight
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg.
14 350 15.00 381 65.50 1664 24.00 610 21.00 533 1.38 35 890 404
16 400 16.00 406 74.50 1892 24.00 610 23.50 597 1.44 37 1252 568
18 450 17.00 432 82.50 2096 24.00 610 25.00 635 1.56 40 1596 725
20 500 18.00 457 91.00 2311 30.00 762 27.50 699 1.69 43 2023 918
24 600 20.00 508 107.50 2731 30.00 762 32.00 813 1.88 48 2907 1320
150 PSI/10.3 bar non-shock cold working pressure from -20°F to 150°F/-29°C to 66°C
t
Maximum working temperature 350°F/177°C at 100 PSI/6.9 bar
*100 PSI/6.9 bar saturated steam to 338°F/170°C
**50 PSI/3.4 bar saturated steam to 297°F/147°C
* 14" and 16"
** 18", 20" and 24"
FREEZING WEATHER PRECAUTION: Subsequent to testing a piping
system, valves should be left in an open position to allow com-
plete drainage.
t For detailed Operating Pressure, refer to Pressure Temperature
Chart on page 114.
WARNING: This product can expose you to chemicals includ-
ing lead, which is known to the State of California to cause
cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.