Buying Guide

49
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
Visit www.nibco.com for current Chem-Guide and galvanic potential in piping systems information.
www.nibco.com
AHEAD OF THE FLOW
®
Revised 4/20/2020
250 PSI CWP Iron Body Gate Valve
MATERIAL LIST
PART SPECIFICATION
1. Valve Body Ductile Iron ASTM A536
2. Resilient Wedge
Ductile Iron Disc Encapsulated by
EPDM ASTM D 2000
3. Wedge Nut Bronze ASTM B584 Alloy C83600
4. Stem Aluminum Bronze ASTM B 150 Alloy C61400
5. Bonnet Gasket EPDM ASTM D 2000
6. Bonnet Screw 18-8 Stainless Steel ASTM A193
7. Bonnet Ductile Iron ASTM A536
8. Stem Primary O-Ring EPDM ASTM D 2000
9. Stem Thrust Washer (lower) Bronze ASTM B584
10. Stem Thrust Washer (upper) Stainless Steel ASTM A 276 UNS S 41000
11. Gland Seal O-Ring EPDM ASTM D 2000
12. Stem Seal Bushing Bronze ASTM B584
13. Stem Secondary O-Ring (2) EPDM ASTM D 2000
14. Gland Flange Ductile Iron ASTM A536
15. Wiper Ring - Stem EPDM ASTM D 2000
16. Nut, Wrench - Square Iron ASTM A126-B
17. Washer, Wrench Nut Carbon Steel, DIN 9021 B
18. Screw WR Nut Alloy Steel ASTM A 574 M Zinc Plated
19. Screw, Gland Flange Alloy Steel ASTM A 574 M Zinc Plated
20. Handwheel (Optional) Ductile ASTM A536 (not pictured)
Coating — Electrostatically applied fusion-bonded epoxy 8-20 mil. inside and outside.
Meets or exceeds performance requirements of AWWA C550.
Epoxy coating is not intended to serve as a dielectric barrier internal to the piping system.
Maximum operating temperature 160°F/71°C.
CONFORMS TO AWWA C509 • EPOXY MEETS OR EXCEEDS
AWWA C550 • END CONNECTIONS DESIGNED FOR USE WITH
C900 PVC PIPE • CERTIFIED TO NSF/ANSI 372 • DUCTILE IRON
PIPE SIZE AWWA C151/ANSI A21.51 AND C900 CPVC PIPE
DIMENSIONS — WEIGHTS — QUANTITIES
Hand Wheel
Size A B C D E F (Optional)
Turns
Weight
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. to Open Lbs. Kg.
4 100 10.7 272 13.5 342 3.5 90 4.9 125 1.8 46 3.5 89 10.2 260 13.0 62 28
6 150 12.9 327 17.0 432 4.7 120 7.0 178 2.0 50 4.0 102 14.8 375 15.6 106 48
8 200 15.6 396 20.4 519 5.9 150 9.2 233 2.5 64 4.5 114 14.8 375 17.3 187 85
10 250 17.0 432 23.8 605 8.0 203 11.2 285 2.4 60 5.2 132 15.7 400 21.4 286 130
12 300 18.0 457 27.0 686 9.5 242 13.3 338 2.5 64 5.5 140 19.7 500 25.3 418 190
PCR-619-RW
Ductile IPS Push-On
*Weighted average lead content ≤ 0.25%
Bolted Bonnet • Non-Rising Stem • Resilient Wedge
250 PSI/17.2 bar non-shock cold working pressure
FREEZING WEATHER PRECAUTION: Subsequent to testing a piping system, valves should be left in an open position to allow complete drainage.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and
birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.