Buying Guide

42
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
Visit www.nibco.com for current Chem-Guide and galvanic potential in piping systems information.
www.nibco.com
AHEAD OF THE FLOW
®
Revised 4/20/2020
MATERIAL LIST
PART SPECIFICATION
1. Handwheel Nut Ductile Iron ASTM A536
2. Identification Tag Aluminum
3. Handwheel Fabricated Steel
4. Yoke Bushing Ductile Iron ASTM A536
5. Split Yoke Bolt Steel ASTM A307/SAE J429
6. Split Yoke Bolt Nut Steel ASTM A307
7. Yoke Cast Iron ASTM A126 Class B
8. Gland Follower Nut Steel ASTM A563
9. Gland Follower Ductile Iron ASTM A536
10. Yoke Bolt Steel ASTM A307/SAE J429
11. Yoke Bolt Nut Steel ASTM A563
12. Gland Follower Bolt Steel ASTM A307/SAE J429
13. Packing Gland Steel ASTM A 108 12L14
14. Packing
Wire Reinforced Carbon Yarn, Resilient
Core, Graphite and Zinc Finish
15. Backseat Bushing Steel ASTM A108 12L14
16. Bonnet Cast Iron ASTM A126 Class B
17. Stem Steel ASTM A 108 12L14 Electroless NI-PI
18. Body Bolt Steel ASTM A307/SAE J429
19. Body Bolt Nut Steel ASTM A563
20. Body Gasket Synthetic Fibers / Nitrile
21. Body Cast Iron ASTM A126 Class B
22. Wedge Cast Iron ASTM A126 Class B
23. Seat Ring Cast Iron ASTM A126 Class B
24. Grease Fitting Alemite 1743B (not shown)
25. Swing Nut Steel ASTM A563
26. Swing Bolt Steel ASTM A307/SAE J429
27. Stem Collar Steel ASTM A108 12L14 (not shown)
28. Wedge Pin Steel ASTM A 108 12L14 (not shown)
29. Wedge Nut Ductile Iron ASTM A536 (not shown)
Class 125 All Iron Trim Iron Body Gate Valves
Bolted Bonnet • Outside Screw and Yoke • Solid Wedge
CONFORMS TO MSS SP-70
F-617-ON
Flanged
F-617-ON
Flg x Flg
DIMENSIONS—WEIGHTS—QUANTITIES
Dimensions
Size A B C D E
Turns to
Weight
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Open Lbs. Kg.
14 350 15 381 65.50 1660 24 610 21.00 533 1.38 35 29.38 890 404
16 400 16 407 74.50 1892 24 610 23.50 597 1.44 37 33.50 1252 568
18* 450 17 432 82.50 2096 24 610 25.50 635 1.56 40 37.63 1595 724
20* 500 18 457 91.00 2311 30 762 27.50 699 1.69 43 41.88 2001 907
24* 600 20 508 107.50 2731 30 762 32.00 813 1.88 48 50.06 2879 1306
150 PSI/10.3 bar non-shock cold working pressure from -20°F to 150°F/-29°C to 66°C
t
Maximum working temperature 350°F/177°C at 100 PSI/6.9 bar
*100 PSI/6.9 bar saturated steam to 338°F/170°C
**50 PSI/3.4 bar saturated steam to 297°F/147°C
* 14" and 16"
** 18", 20" and 24"
NOTE: NIBCO may substitute Ductile Iron ASTM A395 (60-40-18) for ASTM
A126 Class B Cast Iron for the Body, Bonnet, Wedge, or Disc. NIBCO
may substitute Ductile Iron ASTM A395 (60-40-18) or ASTM A536 (65-
45-12) for all other ASTM A126 Class B Cast Iron components.
FREEZING WEATHER PRECAUTION: Subsequent to testing a piping system,
valves should be left in an open position to allow complete drainage.
t For detailed Operating Pressure, refer to Pressure Temperature Chart on
page 114.
WARNING: This product can expose you to chemicals including
lead, which is known to the State of California to cause cancer
and birth defects or other reproductive harm. For more information
go to www.P65Warnings.ca.gov.