Buying Guide

41
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
Visit www.nibco.com for current Chem-Guide and galvanic potential in piping systems information.
www.nibco.com
AHEAD OF THE FLOW
®
Revised 4/21/2020
MATERIAL LIST
PART SPECIFICATION
1. Stem Steel, ASTM A108 12L14 NI PLTD
2. Nut, Handwheel Ductile Iron, ASTM A536
3. Nameplate, I.D. Aluminum
4. Handwheel, Blue Cast Iron, ASTM A126-B
5. Bushing, Yoke Ductile Iron, ASTM A536
6. Screw, Hex - Bonnet Cap Steel, ASTM A307 / SAE J429
7. Cap, Bonnet Ductile Iron, ASTM A536
8. Grease Fitting (not shown) Steel
9. Nut, Square - Bonnet Cap Steel, ASTM A563
10. Bonnet Cast Iron, ASTM A126-B
11. Nut, Heavy Hex - GLD Follow Steel, ASTM A563
12. Gland Follower Ductile Iron, ASTM A536
13. Pack Gland Powdered Metal, ASTM B783
14. Pack Ring Aramid Fibers / Graphite
15. Bolt, SQ Head - GLD Follow Steel, ASTM A307 / SAE J429
16. Screw, Hex - Body Steel, ASTM A307 / SAE J429
17. Gasket, Body Synthetic Fiber / Nitrile
18. Nut, Hex - Body Steel, ASTM A563
19. Collar, Stem Steel, ASTM A108
20. Pin, Wedge Steel, ASTM A108
21. Wedge Cast Iron, ASTM A126-B
22. Ring, Seat - Body Cast Iron, ASTM A126-B
23. Body Cast Iron, ASTM A126-B
1
Sizes thru 8" made with Yoke Integral with Bonnet. 10" and 12" sizes made with
separate Yoke Bolted to Bonnet.
NOTE: NIBCO may substitute Ductile Iron ASTM A395 (60-40-18) for ASTM A126
Class B Cast Iron for the Body, Bonnet, Wedge, or Disc. NIBCO may substi-
tute Ductile Iron ASTM A395 (60-40-18) or ASTM A536 (65-45-12) for all other
ASTM A126 Class B Cast Iron components.
Class 125 All Iron Trim Iron Body Gate Valves
Bolted Bonnet • Outside Screw and Yoke • Solid Wedge
200 PSI/13.8 bar non-shock cold working pressure to -20°F to 150°F/-29°C to 66°C
t
Maximum working temperature 450°F/232°C at 125 PSI/8.6 bar
125 PSI/8.6 bar saturated steam to 353°F/178°C
CONFORMS TO MSS SP-70
F-617-ON
Flanged
T-617-ON
Threaded
F-617-ON
Flg x Flg
T-617-ON
NPT x NPT
DIMENSIONS—WEIGHTS—QUANTITIES
Dimensions
F-617-ON T-617-ON
Size A A B C D E F-617-ON T-617-ON
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Lbs. Kg.
2 50 7.00 178 5.63 143 16.26 413 8.00 203 6.00 152 0.62 16 41 19 30 14
2½ 65 7.50 191 5.88 149 17.26 438 8.00 203 7.00 178 0.69 18 55 25 39 18
3 80 8.00 203 6.13 156 19.44 494 8.00 203 4.50 114 0.75 19 67 30 47 21
4 100 9.00 229 6.50 165 23.54 598 10.25 260 9.00 229 0.94 24 107 49 77 35
5 125 10.00 254 X X 27.01 686 10.25 260 10.00 254 0.94 24 145 66 X X
6 150 10.50 267 X X 30.73 781 12.00 305 11.00 279 1.00 25 178 81 X X
8 200 11.50 292 X X 40.29 1023 14.00 356 13.50 343 1.12 28 309 140 X X
10 250 13.00 330 X X 48.45 1231 16.25 413 16.00 406 1.19 30 481 219 X X
12 300 14.00 356 X X 56.26 1429 18.00 457 19.00 483 1.25 32 706 321 X X
x = Not available this size.
FREEZING WEATHER PRECAUTION: Subsequent to testing a
piping system, valves should be left in an open position to
allow complete drainage.
t For detailed Operating Pressure, refer to Pressure
Temperature Chart on page 114.
WARNING: This product can expose you to chemi-
cals including lead, which is known to the State of
California to cause cancer and birth defects or other
reproductive harm. For more information go to www.
P65Warnings.ca.gov.