Buying Guide

16
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
Visit our website for the most current information.
www.nibco.com
AHEAD OF THE FLOW
®
Revised 7/20/2018
Dezincification
Resistant
Class 200 Bronze Gate Valves
Block Pattern • Union Bonnet • Rising Stem • Alloy Solid Wedge • Integral Seat
200 PSI/13.8 bar saturated steam to 391° F/201° C
400 PSI/27.6 bar non-shock cold working pressure
CONFORMS TO MSS SP-80
T-154-A
Threaded
T-154-A
NPT x NPT
with Integral Seats
MATERIAL LIST
PART SPECIFICATION
1. Handwheel Nut 300 Series Stainless Steel
2. Identification Plate Aluminum
3. Handwheel Malleable Iron ASTM A 47
Silicon Bronze ASTM B 371
4. Stem Alloy C69400/C69430 or ASTM B 99
Alloy C65100
5. Packing Nut
Bronze ASTM B 62 or ASTM B124
Alloy C37700 or Brass ASTM B16
6. Packing Gland
Bronze ASTM B 62 or ASTM B584
Brass ASTM B16 C36000
7. Packing Aramid Fibers with Graphite
8. Bonnet Bronze ASTM B 61
9. Union Nut Bronze ASTM B 61
10. Body Bronze ASTM B 61
11. Wedge ASTM B584 Alloy C97600
DIMENSIONS—WEIGHTS—QUANTITIES
Dimensions
Size A B Weight
Master
In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty.
¹⁄₄ 8 1.88 48 4.81 122 1.15 0.52 50
³⁄₈ 10 2.06 52 4.81 122 1.14 0.52 50
¹⁄₂ 15 2.31 59 5.38 137 1.49 0.68 40
³⁄₄ 20 2.44 62 6.31 160 2.23 1.01 30
1 25 2.88 73 7.56 192 3.37 1.53 20
1 ¹⁄₄ 32 3.13 83 8.88 226 4.76 2.16 10
1 ¹⁄₂ 40 3.38 86 10.25 260 6.32 2.87 10
2 50 3.88 99 12.50 318 10.96 4.97 6
FREEZING WEATHER PRECAUTION: Subsequent to testing a piping
system, valves should be left in an open position to allow complete
drainage.
t For detailed Operating Pressure, refer to Pressure Temperature
Chart on page 114.
WARNING: This product can expose you to chemicals includ-
ing lead, which is known to the State of California to cause
cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.