Buying Guide

100
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
Visit our website for the most current information.
www.nibco.com
AHEAD OF THE FLOW
®
Revised 7/20/2018
Iron Valve Options and Accessories
Floor Stands
Floor Stands
Floor stands are designed for operating gate, globe and angle valves that are installed in inaccessible
places under a floor. For your convenience, they are available in two heights (20" and 32"). They are also
available with an indicator so the position of the disc (wedge) can be read at a glance.
Rising Stem Valve
Valve Size ”A“
In. mm.
2" 28.50 724
2¹⁄₂" 29.00 737
3" 31.00 787
4" 36.00 914
5" 39.00 991
6" 43.00 1,092
8" 53.00 1,346
10" 60.50 1,537
12" 70.00 1,778
Non-Rising Stem Valve
Valve Size ”A“
In. mm.
2" 26.56 675
2¹⁄₂" 28.06 713
3" 28.75 730
4" 31.19 792
5" 32.44 824
6" 36.31 922
8" 42.69 1,084
10" 45.88 1,165
12" 52.06 1,322
When ordering a floor stand – the dimension from the centerline of the valve waterway to the top of the
floor must be furnished. This dimension is the ”A“ dimension pictured below. The NIBCO valve figure
number and size must also be furnished and specify valve stem coupling for use with floor stand. Nothing
extra is needed, except the floor mounting bolts which will vary depending on the floor construction.
Minimum "A" dimensions:
Without
Indicator
With
Indicator
Floor Stand Base
Template
9" outside diameter
7¹⁄₂" bolt circle diameter
³⁄₄" hole diameter
NIBCO INC. reserves the right to change materials, options and accessories without notice.