Buying Guide

71
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
Visit our website for the most current information.
www.nibco.com
AHEAD OF THE FLOW
®
PC-280 & PC-20M FEATURES
TOOLS
Light weight
PC-20M Mini: 3.7 lbs. (without jaw)
PC-280: 9.4 lbs. (without jaw)
Easy to handle / simple design
Jaws rotate 350°
No calibration necessary
No complicated switches or controls
Mini: Ergonomic compact design is easy to use
in tight spaces
Interruptible crimp cycle
Safety feature prevents injuries
Can begin crimp, stop to align and level fitting / tube,
and complete crimp
Battery
Can be changed during crimp cycle
Lithium-ion has short charging cycle and larger
capacity
• PC-4ML: 15 minute recharge time
• PC-7L: 22 minute recharge time
AC Power Adapter
Converts the tool to electric power
Allows continuous use
Service light
Illuminates at 10,000 cycles
Tool will not stop operating when light illuminates
• RED indicates battery charge status, service
intervals, tool functions & faults
• WHITE illuminates the work area
Hydraulic Pressure Check (HPC)
An audible warning signal sounds if adequate work-
ing pressure is not achieved
PRESSING CHAINS (2 1/2" to 4" ONLY)
Uniform crimp
Maintains proper pipe alignment
Easy to install and remove
Once secured to fitting, chain cannot fall off
prior to crimp
Chain easily removed post crimp
Crimp Identification
Easy to identify crimp has been made from a distance
MATERIAL LIST
MODEL NO. DESCRIPTION LBS.
PC-7 12V, NiMH Battery - 3.0Ah for PC-100 1.57
PC-8 120V Standard Battery Charger for PC-6 or PC-7 1.10
PC-4M 1.3 Ah NiCd 9.6V Battery for Mini Pressing Tool 0.85
PC-5M 120V Charger for Mini Pressing Tool 1.13
PC-100C Metal Case for PC-100 Tool 14.30
NIBCO
®
Press System Tools
PC-100 and PC-10M Accessories
PC-7
12V, 3.0 Ah
NiMH Battery
PC-4M
9.6V, 1.3 Ah
NiCd Battery
PC-8
120V Battery Charger
Revised 11/9/2017