Buying Guide

66
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
Visit our website for the most current information.
www.nibco.com
AHEAD OF THE FLOW
®
Butterfly Valve Options and Accessories
Lever-Lock Operator (Standard)
PFD2000
Position-Lock Operator (Optional)
PFD2000
1. Handle Polymer Coated Iron
2. Lever-Lock Zinc Plated Steel
3. Throttle Plate Zinc Plated Steel
PART SPECIFICATION
DIMENSIONS AND TORQUE OUTPUT
PFD Dimensions Torque Rated Output in Inch-Pounds
Lever Lever Throttle Plate/
Size (STD) (STD) Infinite Pos. Kit A B C D At 60 pounds Pull At 100 pounds Pull
2¹⁄₂”-3” T115107PP T115138PP T114841FG 10¹⁄₂ 1 4⁵⁄₈ 6³⁄₁₆ 540 In-Lbs. 900 In-Lbs.
4 T115108PP T115138PP T114842FG 10¹⁄₂ 1 4⁵⁄₈ 6³⁄₁₆ 540 In-Lbs. 900 In-Lbs.
The lever-lock handle and throttling plate provide throttling notch-
es every 10
o
for excellent manual control in balancing up to 90
o
or shut off service. The valve may be padlocked in any one of the
positions including opened or closed by virtue of a locking hole
located in the handle and lever.
The position-lock can be used to set the valve in any position or as a
memory stop so the valve may be reopened to the previous position.
The valve may be padlocked in full open or full closed position.
Ordering: Sold as a field retrofitable kit only.
Cast Iron Gear Operator
The NIBCO
®
butterfly valve can be provided with heavy-duty operator and indicator. Recommended for valves 8" and larger, for trouble-free operation in all
moisture and weather conditions (not submersible). Operator is a self-locking worm gear type. Equipped with adjustable stops at open and shut positions.
Ordering: Specify by adding (-5) to Fig. No., i.e., PFD2000-5. Babbit sprocket may be added to handwheel. See below for sizing information.
Available options: memory stop gear operator kit, 2" square operating nut, flag indicator and handwheel for GO.
Gear Operator options and accessories (2 1/2" through 4" 2000 series only)
2" Square Operating Nut Memory Stop Flag Indicator
2 1/2"-4"
Consult factory for: square operating nut, memory stop and flag indicator
NOTE: 1. Stem adapter bushing must be ordered seperately when needed for smaller size valves.
2. All other accessories must be ordered separately. (Sprocket rim, square operator nut, flag indicator & memory stop kit.)
3. Gear operator comes with handwheel.
GEAR OPERATOR DETAIL FOR SIZES 2 1/2" TO 4" (PFD2000 ONLY) GEAR OPERATOR ACCESSORIES & REPLACEMENT PARTS
GEAR GEAR
DIMENSIONS (INCHES)
STEM SPROCKET SQUARE
FLAG MEMORY REPLACEMENT
OPERATOR RATIO OP ADAPTER RIM OPERATING
INDICATOR STOP KIT HANDWHEEL
NUMBER WEIGHT A B C D E F BUSHING MODEL NUT
T117118PP 24:1 10 7.64 1.77 5.04 4.24 5.91 2.79 T046653PP #1½ T117792FC T116682PP T026196PP T117122PP
T117118PP 24:1 10 7.64 1.77 5.04 4.24 5.91 2.79 T046654PP #1½ T117792FC T116682PP T026196PP T117122PP
PFD
VALVE
2½ - 3
4
Revised 8/7/2012
MATERIAL LIST