Buying Guide

58
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
Visit our website for the most current information.
www.nibco.com
AHEAD OF THE FLOW
®
NIBCO
®
Press System Butterfly Valves
Ductile Iron Body • Extended Neck • Geometric Drive
Molded-In Seat Liner • Lug Style with Press x Press Female Ends
PFD-2000
Lug Style
EPDM Liner
and Aluminum
Bronze Disc
Press x Press
Female End
NOT RECOMMENDED
FOR STEAM SERVICE
DIMENSIONS — WEIGHTS
Size
G Metal Rubber
In. mm. A B C D E F Flat H I
2
1
⁄2 65 2.90 4.69 1.25 5.88 3.27 .38 .370 1.812 1.938
3 80 3.15 5.12 1.25 6.12 3.40 .38 .370 1.812 1.938
4 100 4.09 6.12 1.25 6.88 4.00 .38 .403 2.062 2.188
CONFORMS TO MSS-SP67 • MSS-SP25 • API-609 •
NSF/ANSI-8 COMMERCIAL HOT 180°F (INCLUDES
ANNEX F AND G) AND NSF/ANSI-372
MATERIAL LIST
PART SPECIFICATION
1. Stem Stainless Steel ASTM A 582 Type 416
2. Collar Bushing Brass ASTM B 124
3. Stem Seal EPDM Rubber
4. Body Seal EPDM Rubber
5. Nameplate Aluminum
6. Upper Bushing Wrot Copper ASTM B 75 Alloy C12200
7. Liner EPDM Rubber
8. Disc Alum. Brz. ASTM B 148 Alloy 954/955
9. Lower Bushing Wrot Copper ASTM B 75 Alloy C12200
10. Body Lug Ductile Iron ASTM A 536
11. Flange Body (2) Carbon Steel
12. Flange Gasket (2) EPDM
13. Flange Press Ends (2) Wrot Copper ASTM B 75 Alloy C12200
14. O-Ring (2) EPDM
15. Cap Screws Carbon Steel
Available with lock lever handle or gear operator.
Total
Size
J N O P R S Lug
Weight
In. mm. Square Dia. B.C. Dia. Dia. No. Length Lbs. Kg.
2
1
⁄2 65 3.25 .562 3.25 .437 .500 3.13 24.00 10.88
3 80 3.25 .562 3.25 .437 .500 3.44 26.00 11.78
4 100 3.25 .625 3.25 .437 .562 4.00 38.00 17.23
Refer to
page 65
for bolt
lengths
NIBCO Press System butterfly valves are designed to meet MSS SP-67 with the exception of the
end connection. Male and female press-to-connect ends are new technology not yet covered in
the current edition of this specification.
200 psi/13.8 bar non-shock cold working pressure
250°F maximum operating temperature
Revised 7/25/2018
WARNING: This product can expose you to chemicals
including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.