Buying Guide

28
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
Visit our website for the most current information.
www.nibco.com
AHEAD OF THE FLOW
®
Revised 7/25/2018
NIBCO
®
Press System Lead-Free Bronze Ball Valves
Features: Silicon Performance Bronze
®
Body • Press Ends Leak Detection • Full Port •
Blowout-Proof Stem
Approvals: MSS SP-110 • IAPMO/ANSI Z1157 (IGC-157) • NSF/ANSI-61-8
Commercial Hot 180°F (includes annex F and G) and NSF/ANSI-372
TPC-585-80-LF
NPT x P
TPC-585-80-LF
Thread x Press
Female
Pressure rating: 250 psi non-shock cold working pressure
Body design pressure: 600 psi non-shock cold working pressure
Maximum pressure / temperature: 200 psi at 250° F
Lead-Free markings: Double oval in body casting, white handle and blue hang tag
Handle Markings
MATERIAL LIST
PART SPECIFICATION
1. Handle Nut Zinc Plated Steel
2. Stem Silicon Bronze ASTM B371 Alloy C69300
3. Pack Gland Brass ASTM B16 Alloy C36000
4. Packing, Stem PTFE
5. Thrust Washer Reinforced PTFE
6. Handle Assembly Zinc Plated Steel Clear Chromate Plastisol Coated
7. Body End Silicon Bronze ASTM B584 Alloy C87600
8. Seat Ring (2) Reinforced PTFE
9. Ball Silicon Bronze ASTM B283 Alloy C69300 or SAE J461 C46500 (1/2" - 1")
Silicon Bronze ASTM B283 Alloy C69300 or ASTM A276, Alloy S31600 (1 1/4" - 2")
10. Body Silicon Bronze ASTM B584 Alloy C87600
11. Boss seal o-ring EPDM
12. O-Ring EPDM
13. Press End Adapter Wrot Copper ASTM B75 Alloy C12200
Handle Options:
• Stainless steel lever
• NIB-SEAL
®
• Locking lever
• Stainless steel locking lever
• Memory stop
• Extended lever w/ memory stop
• Round
• Wing
• Horizontal and vertical chain
DIMENSIONS—WEIGHTS
NOM SIZE A B C D E F G J Weight Master
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Lbs. Kg. Lbs. Kg. Ctn. Qty.
1/2 15 3.1 79 3.96 101 1.96 50 0.5 13 1.86 47 1.2 30 0.7 18 5.93 151 0.80 0.36 50
3/4 20 3.96 101 4.76 121 2.28 58 0.75 19 2.45 62 1.56 40 0.96 24 7.33 186 1.35 0.61 30
1 25 4.47 114 4.76 121 2.48 63 1 25 2.92 74 1.97 50 0.89 23 7.56 192 1.90 0.86 20
1-1/4 32 4.99 127 6.76 172 3.1 79 1.25 32 3.3 84 2.31 59 1.01 26 9.86 250 3.20 1.45 12
1-1/2 40 5.9 150 6.76 172 3.32 84 1.5 38 3.84 98 2.84 72 1.39 35 10.53 267 4.40 2.00 6
2 50 6.61 168 6.76 172
3.56 90 2 51 4.38 111 3.54 90 1.51 38 10.94 278 6.45 2.93 6
NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 psi CWP to 250 psi CWP to match the
Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.
Dezincification
Resistant
LEAD-FREE: Weighted average lead content ≤ 0.25%
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other
reproductive harm. For more information go to www.P65Warnings.ca.gov.