Buying Guide

24
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
Visit our website for the most current information.
www.nibco.com
AHEAD OF THE FLOW
®
Revised 9/17/2019
PC-585-80-LF
Press x Press
Female End
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For
more information go to www.P65Warnings.ca.gov.
NIBCO
®
Press System Lead-Free Bronze Ball Valves
Features: Silicon Performance Bronze
®
Two-Piece Body • Press Ends Leak Detection •
Full Port • Blowout-Proof Stem
Approvals: MSS SP-110/145 • IAPMO/ANSI Z1157 • NSF/ANSI 61/372-8 Commercial Hot 180°F
MATERIAL LIST
PART SPECIFICATION
1. Handle Nut Zinc Plated Steel
2. Stem Silicon Bronze ASTM B371 Alloy C69300
3. Pack Gland Brass ASTM B16 Alloy C36000
4. Packing, Stem PTFE
5. Thrust Washer Reinforced PTFE
6. Handle Assembly Zinc Plated Steel Clear Chromate Plastisol Coated
7. Body End Silicon Bronze ASTM B584 Alloy C87600
8. Seat Ring (2) Reinforced PTFE
9. Ball (vented) DZR Brass SAE J461 C46500 (¼"-1")
Stainless Steel ASTM A276 S31600 or ASTM A351 CF8M (1¼"-3")
10. Body Silicon Bronze ASTM B584 Alloy C87600
11. Boss seal o-ring (2) EPDM
12. O-Ring (2) EPDM - Leak Detection
13. Press End Adapter (2) Wrot Copper ASTM B75 Alloy C12200
PC-585-80-LF
P x P
Size range: ½” - 3”
Pressure rating: 250* PSI non-shock cold working pressure
Body design pressure: 600 PSI CWP non-shock cold working pressure
Maximum pressure / temperature: 225 PSI at 250° F*
Lead-free markings: Double oval in body casting, white handle and blue hang tag
DIMENSIONS—WEIGHTS—QUANTITIES
SIZE A B C D E Weight
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg.
1/2 15 3.93 100 3.96 101 1.96 50 0.50 13 2.53 64 0.80 0.36
3/4 20 5.00 127 4.76 121 2.28 58 0.75 19 3.23 82 1.56 0.71
1 25 5.61 142 4.76 121 2.48 63 1.00 25 3.84 98 2.13 1.00
11/4 32 6.23 158 6.76 172 3.10 79 1.25 32 4.21 107 3.73 1.69
11/2 40 7.56 192 6.76 172 3.32 84 1.50 38 4.79 122 5.53 2.51
2 50 8.40 213 6.76 172 3.56 90 2.00 51 5.36 136 7.95 3.61
21/2 65 9.49 241 8.06 205 4.33 110 2.50 64 6.55 166 16.20 7.35
3 76 10.45 265 8.06 205 4.58 116 2.95 75 7.13 181 16.50 7.48
*200 PSI CWP and 200 PSI at 200°F for 2½" and above
NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 PSI CWP to 250 PSI CWP to match the
Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification
Dezincification
Resistant
Handle Options:
• Stainless Steel Lever
• NIB-Seal®
• NIB-Seal® Locking Lever
• Locking Lever
• Stainless Steel Locking Lever
• Memory Stop
• Extended Lever w/ Memory Stop
• Round
• Wing
• Horizontal and Vertical Chain
Handle Markings
PATENT US
10,234,043
LEAD-FREE: Weighted average lead content ≤ 0.25%