Buying Guide

29
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
Visit our website for the most current information.
www.nibco.com
AHEAD OF THE FLOW
®
LEAD-FREE: Weighted average lead content ≤ 0.25%
NIBCO
®
Press System Lead-Free Bronze Ball Valves
Features: Silicon Performance Bronze
®
Body • Copper End • Full Port •
Blowout-Proof Stem • Stainless Trim
Approvals: MSS SP-145 • IAPMO/ANSI Z1157 (IGC-157) • NSF/ANSI-61-8
Commercial Hot 180°F (includes annex F and G) and NSF/ANSI-372
MATERIAL LIST
PART SPECIFICATION
1. Handle Nut Plated Steel
2. Stem Stainless Steel ASTM A276 Type 316
3. Pack Gland Brass ASTM B16 Alloy C36000
4. Packing, Stem PTFE
5. Thrust Washer Reinforced PTFE
6. Handle Assembly Plated Steel with Plastisol Coating
7. Body End Silicon Bronze ASTM B584 Alloy C87600
8. Seat Ring (2) Reinforced PTFE
9. Ball (vented) Stainless Steel ASTM A276 Type 316
10. Body Silicon Bronze ASTM B584 Alloy C87600
11. Boss seal o-ring EPDM
12. O-Ring EPDM
13. Press End Adapter Wrot Copper ASTM B75 Alloy C12200
TPC-585-66-LF
NPT x P
TPC-585-66-LF
Thread x Press
Female
Pressure rating: 250 psi non-shock cold working pressure
Body design pressure: 600 psi CWP
Maximum pressure / temperature: 200 psi at 250° F
Lead-Free markings: Double oval in body casting, white handle and blue hang tag
Handle Markings
Handle Options:
• Stainless Steel Lever
• NIB-SEAL
®
• Locking lever
• Stainless Steel Locking Lever
• Memory stop
• Extended lever w/ memory stop
• Round
• Wing
• Horizontal and vertical chain
DIMENSIONS—WEIGHTS
NOM SIZE A B C D E F G J Weight Master
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Lbs. Kg. Lbs. Kg. Ctn. Qty.
1/2 15 3.1 79 3.96 101 1.96 50 0.5 13 1.86 47 1.2 30 0.7 18 5.93 151 0.80 0.36 50
3/4 20 3.96 101 4.76 121 2.28 58 0.75 19 2.45 62 1.56 40 0.96 24 7.33 186 1.35 0.61 30
1 25 4.47 114 4.76 121 2.48 63 1 25 2.92 74 1.97 50 0.89 23 7.56 192 1.90 0.86 20
1-1/4 32 4.99 127 6.76 172 3.1 79 1.25 32 3.3 84 2.31 59 1.01 26 9.86 250 3.20 1.45 12
1-1/2 40 5.9 150 6.76 172 3.32 84 1.5 38 3.84 98 2.84 72 1.39 35 10.53 267 4.40 2.00 6
2 50 6.61 168 6.76 172
3.56 90 2 51 4.38 111 3.54 90 1.51 38 10.94 278 6.45 2.93 6
Dezincification
Resistant
Revised 7/25/2018
NIBCO Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 600 psi CWP to 250 psi CWP to match the
Press System. Male and female press-to-connect ends are new technology not yet covered in the current edition of this specification.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other
reproductive harm. For more information go to www.P65Warnings.ca.gov.