Operation Manual

Niagara SCX User Guide
Output tab
Use the Output tab (Figure 58) to set the output frame rate, format, and destination. The
Niagara SCX and SCX Explorer reside on different computers.
Figure 58. Output tab
The Output tab has the following controls.
File Name
Click on the browse button at the end of the field to search for a file name.
IMPORTANT! When Niagara SCX and SCX Explorer reside on different
computers, always start your browse for files by clicking Network. Then
work down or enter the entire file pathname beginning with the system
name (such as \\fileserver\c\videos).
If you simply enter a file name, you may inadvertently browse your local
computer when the media file resides on the remote computer.
Note: Remember the file name applies to the encoder system and not the system
currently running SCX Explorer.
Create Unique
File
Enable this field to create a file that the system does not overwrite.
Frame Rate
Enter the frame rate.
Audio Format
Select the audio format from the drop-down list.