Operation Manual

Niagara SCX User Guide
Video Settings tab
You can control the capture properties for the selected video device on the Video Settings tab
(Figure 54):
Figure 54. Video Settings tab
The Video Settings tab has the following controls.
Input
Select the input connectors for the capture device from the drop-down list.
Signal
Select the video standard the capture device supports from the drop-down list.
Proportions
Format
Size
W/H
Select the video properties from the drop-down list.
Brightness
Contrast
Saturation
Hue
Drag the slider to adjust the capture properties. When making adjustments,
verify adjustments apply to chosen input. Otherwise, your adjustments apply
to all the input sources listed.
Note: These capture properties remain available regardless of whether the
encoder starts or remains idle.
Gamma
Correction
Adjust the gamma of the incoming video. (See Gamma Correction for more
information.)
Tuning
Utilities
Click Tuning Utilities to access tuning utilities for a selected card. Refer to
Tuning Utilities for additional diagnostics information.
Restore
Defaults
Click Restore Defaults to restore the system to the factory defaults