Operation Manual

Windows Media Options and Settings
28 ViewCast
Filters tab
Use the Filters tab to enable SimulStream and deinterlacing (Figure 26). See Filters for more
information.
Note: This tab is optional. Refer to Tuning Utilities for more diagnostics information.
Figure 26. Filters tab:
The Filters tab has the following controls.
Enable
SimulStream
Enable SimulStream.
Show X filters
per device
Specify how many filters you plan to expose.
Allow
multiple
instances of
each filter
Enable this field to allow multiple video capture streams.
Off
Perform no deinterlacing of any kind.
Auto
 Apply inverse telecine deinterlacing to all telecine video.
 Apply motion adaptive deinterlacing to video that is not telecine.
 Switch dynamically between the two modes as the content changes.
Note: Available for NTSC video only.