Operation Manual

Windows Media Options and Settings
26 ViewCast
Output tab
Use the Output tab (Figure 25) to indicate if you want to pull or push the stream and provide a
port number.
Figure 25. Output tab
The Output tab has the following controls.
Enable Pull
Enable this field to have Windows Media Server request the stream.
Note: This method does not provide a secure connection to the server and
should only be used if the encoder and server reside within the same
network firewall.
Pull Port
Enter a port number the server will use to pull the stream.
Push Output
Enable this field to maintain a secure connection to Windows Media Server.
Push Port
Enter a port number the server will use to push the stream.
Server
Enter the server name or IP address.
Alias
Enter the alias (optional).
Username
Enter the user name.
Password
Enter the password.
Save to File
Click Save to file if you want to save the content to a file.
Note: Remember the encoder system references the file name and not the system
running SCX Explorer.