Operation Manual

Windows Media Options and Settings
22 ViewCast
Video Settings tab
Use the Video Settings tab (Figure 21) to control the capture properties for the selected video
device.
Figure 21. Video Settings tab
The Video Settings tab has the following controls.
Input
Select the input connectors available for the capture device from the drop-
down list.
Signal
Select the video standards the capture device supports from the drop-down
list.
Proportions,
Size, W/H
Use these fields to adjust capture properties such as proportion, video size,
and width/height.
Brightness,
Contrast,
Saturation,
Hue
Drag the slider to adjust additional capture properties. When making such
adjustments, verify your adjustments apply to the selected input. Otherwise,
your adjustments apply to all the input sources listed.
Note: The capture properties remain available regardless of whether the
encoder starts or remains idle.
Gamma
Correction
Adjust the gamma of the incoming video. See Gamma Correction for more
information.
Tuning
Utilities
Click Tuning Utilities to access tuning utilities for a selected card. Refer to
Tuning Utilities for additional diagnostics information.
Restore
Defaults
Click Restore Defaults to restore the system to the factory defaults.