Operation Manual

Niagara SCX User Guide
Output tab
You can set output options on the Output tab (Figure 91).
Figure 91. Output tab
The Output tab has the following controls.
Enable
Streaming
Enable this field to stream to a Flash Media Server.
EncodeIP
Enter the IP address.
Destination
Enter the destination.
Video Port
Enter the video port number.
Audio Port
Enter the audio port number.
Time to Live
Enter the seconds for time to live.
Stream Title
Enter the name of the stream.
Stream Info
Enter the stream information.
Save sdp file
Click on the browse button at the end of the field to browse for the sdp file.
Save to File
Click Save to file if you want to save the content to a file.
Note: Remember the encoder system references the file name and not the system
running SCX Explorer.
File Name
Click on the browse button at the end of the field to browse for a file name.
IMPORTANT! When Niagara SCX and SCX Explorer reside on different
computers, always start your browse for files by clicking Network. Then
work down or enter the entire file pathname beginning with the system