Operation Manual

Niagara SCX and SimulStream
94 ViewCast
Video Settings tab
Use the Video Settings tab (Figure 87) to control the capture properties for the selected video
device.
Figure 87. Video Settings
The Video Settings tab has the following controls.
Input
Select the input connectors available for the capture device from the drop-
down list.
Signal
Select the video standard that the capture device supports from the drop-
down list.
Proportions,
Size, W/H
Use these fields to adjust capture properties such as proportion, video size,
and width/height.
Brightness,
Contrast,
Saturation,
Hue
Drag the slider to adjust additional capture properties. When making such
adjustments, verify your adjustments apply to the selected input. Otherwise,
your adjustments apply to all the input sources listed.
Note: The capture properties remain available regardless of whether the
encoder starts or remains idle.
Gamma
Correction
The Gamma Correction field enables you to adjust the gamma of the incoming
video. See Gamma Correction for more information.
 Gamma correction applies to all filters and all output pins on each device.
 You can have different gamma corrections for different physical devices.