Operation Manual

Flash Options and Settings
88 ViewCast
View tab
Use the View tab (Figure 79) to monitor the encoder output. To watch the incoming video or see
the output video, you must have enabled Osprey SimulStream for the capture card. Osprey
SimulStream enables a single card to produce multiple outputs. For more information or to
purchase SimulStream for your Osprey capture card, visit
http://viewcast.com/products/software/simulstream.
Figure 79. View tab
The View tab has the following controls.
Start Preview
Click Start Preview to initiate the view following a buffer delay.
Stop Preview
Click Stop Preview to stop displaying the video immediately.
Note: Playback stops automatically when you select another encoder.