Operation Manual

Niagara SCX User Guide
ViewCast 81
Filters tab
Use the Filters tab (Figure 73) to enable SimulStream and deinterlacing. This tab is optional. See
Niagara SCX and SimulStream for information on setting up a SimulStream session and filters.
Also, see Deinterlace for information on telecine, inverse telecine, and motion adaptive
deinterlace.
Figure 73. Filters tab
The Filters tab has the following controls.
Enable
SimulStream
Enable SimulStream.
Show X filters
per device
Specify how many filters you plan to expose.
Allow
multiple
instances of
each filter
Enable this field to allow multiple video capture streams.
Off
Perform no deinterlacing of any kind.
Auto
 Apply inverse telecine deinterlacing to all telecine video.
 Apply motion adaptive deinterlacing to all video that is not telecine.
 Switch dynamically between the two modes as the content changes.
Note: Available for NTSC video only.